Panasonic AJHD1700 AJHD1700 User Guide - Page 95

Setup menus (continued) No./Item Description of setting No./Item Description of setting 636*2 480i>HD_ OUT 637*2 480i>SD_ OUT For selecting the HD output signal format during 480i tape (DVCPRO50, DVCPRO, DV or DVCAM) playback. (See table below.) 0000 1080i 0001 720p 0002 --------- For selecting the SD output signal format during 480i tape (DVCPRO50, DVCPRO, DV or DVCAM) playback. (See table below.) 0000 480i 0001 480i 0002 480p Output connectors 0000 0001 HD SDI OUT SD SDI OUT 1080i (up- 480i converted output) (no conversion) 720p (up- 480i converted output) (no conversion) VIDEO OUT 480i (no conversion) 480i (no conversion) 0002 Muted 480p* (up- 480i converted output) (no conversion) During SD tape playback, the VTR cannot be operated in the 60 Hz mode. 638*1 IN U/C MODE For selecting the up-conversion picture frame when SD SDI input signals are supplied. 0000 FIT_V: Side panel mode 0001 FIT_H: Top and bottom cut in vertical direction 0002 FIT_HV: Stretch mode 639*1 I U/C RESP H For selecting the horizontal frequency band during the up-conversion of SD SDI input signals. 0000 STD 0001 NARROW 640*1 I U/C RESP V For selecting the vertical frequency band during the up-conversion of SD SDI input signals. 0000 STD 0001 NARROW *1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. *2: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD) or 50 Hz mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. *3: This item is not displayed when the 50 Hz or 25 Hz (HD or SD) mode has been selected as the system menu item No.25 (SYSTEM FREQ) setting. * Setup menu item No.107 and INPUT CHECK do not function, and the same signal as this signal line is output. Setup menu items No.638, 639, 640, 641 and 642 do not function when the AJ-UC1700G optional board has not been installed. The underlining (__) denotes the factory setting mode. *UP: With HD output (HD tape playback or up-converted output) *DW: With SD output (SD tape playback or down-converted output) 641*2 I U/C ENH H For accentuating the horizontal contours during up-conversion of SD SDI input signals. 0000 0dB 0001 i0.7dB 0002 i1dB 0003 i1.2dB 0004 i1.5dB The numbers on the superimposed 0005 i2dB display are approximations only. 642*2 I U/C ENH V For accentuating the vertical contours during up-conversion of SD SDI input signals. 0000 0dB 0001 i0.7dB 0002 i1dB 0003 i1.2dB 0004 i1.5dB The numbers on the superimposed 0005 i2dB display are approximations only. 650 STYLE 0000* CMPNT*: Level adjustment mode for the component style 0001 CMPST: Level adjustment mode for the composite style * The asterisk denotes the factory setting for AJ-HD1700E. 651*3 HUE STYLE (SD)*DW For selecting the rotational axis of the chroma phase adjustment. 0000 Pb-Pr: The axis rotates in a perfect circle on the SDI (component style) vectorscope. 0001 U-V: The axis rotates in a perfect circle on the analog (composite style) vectorscope. 653 Y LVL (HD)*UP 654 Pb LVL (HD)*UP For adjusting the Y level of the HD SDI output. (j¶ to 0 dB to i3 dB) 0000 0.0% : : 1000 100.0% This setting takes effect when : : "CMPNT" has been selected as the 1413 141.3% setup menu item No.650 setting. For adjusting the PB level of the HD SDI output. (j¶ to 0 dB to i3 dB) 0000 0.0% : : 1000 100.0% This setting takes effect when : : "CMPNT" has been selected as the 1413 141.3% setup menu item No.650 setting. 655 For adjusting the PB level of the HD SDI output. Pr LVL (HD)*UP (j¶ to 0 dB to i3 dB) 0000 0.0% : : 1000 100.0% This setting takes effect when : : "CMPNT" has been selected as the 1413 141.3% setup menu item No.650 setting. 656 BK LVL (HD)*UP For adjusting the black level of the HD SDI output. 50 j10.0% : : 150 0.0% This setting takes effect when : : "CMPNT" has been selected as the 250 i10.0% setup menu item No.650 setting. 95