Panasonic AJHDR150 AJHDR150 User Guide - Page 18

Display Panel $ Main Screen Displays the status of the channel selected with the channel button. The main screen has 3 patterns, and its display can be switched by cursor button [#] or [2]. After moving to a screen other than main screen, the main screen returns to pattern 1. Function buttons using the [CANCEL] button can only be operated on the main screen alone. (On the main screen, operation can be implemented in any pattern.) Main Screen Pattern 1 12 3 7 -2 4 5 CH1 CLIP0001 00:00:00:00 (CTL1) ¢REW SDTI I/O LOCAL -DF- F5:MENU4 6 8 7 9 : Main Screen Pattern 2 12 3 4 5 ; CH1 CLIP0001 00:00:00:00 (CTL1) REW 3 25Mx1 LOCAL -DF- F5:MENU4 < 8 7 9 : Main Screen Pattern 3 12 3 4 5 ; CH1 CLIP0001 00:00:00:00 (CTL1) REW 3 12H32M/24H00M LOCAL -DF- F5:MENU = > 8 7 9 Display common to all 3 patterns 1 Selected channel number The number of the channel displaying current status is shown. When the power is engaged, channel 1 is shown. 2 Selected CLIP The CLIP loaded in the channel currently on display is shown. If CLIP is not loaded, "DEFAULT" is shown. 4 Display of time code mode The time code mode shown by "3 Counter display" is displayed. Each time the [F4]+[CANCEL] button is depressed, change is made as TC5CTL15CTL2 ... and "3 Counter display" is changed simultaneously. 5 Simplified operational status display The operational status of the channel currently displayed is shown. EJECT: CLIP is not loaded. STOP: Stop status PLAY: Playback in progress REC: Recording in progress REW: Rewinding in progress FF: Fast forwarding in progress SHTL: Shuttle mode JOG: JOG mode VAR: Variable mode L-PLAY: Loop playback in progress L-REC: Loop recording in progress At the start of operation, the status of channel 1 is shown. 8 REMOTE/LOCAL display Remote mode/local mode of the channel currently displayed is shown. Each time the [CANCEL] + [F3] button is pressed, change is made between REMOTE and LOCAL. During LOCAL, the local mark (¢) lights at the 7 -2 position. REMOTE: The main unit is controlled from external controller. Operations from the simplified manual operations screen are not acknowledged. LOCAL: The main unit is controlled from the front panel. Operations from the external controller are not acknowledged. 9 F5: MENU By pressing the function [F5] button, the menu select screen is shown in the lower register of the display. 3 Counter display TC and CTL counter values are shown. (With drop frame, [.] is shown between seconds and frames.) At CTL1, reset to (00:00:00:00) can be made by pressing the [CANCEL] + [F5] button. 18