Panasonic AJSD955A AJSD930 User Guide

Panasonic AJSD955A - DVC PRO CAMCORDER Manual

Get Panasonic AJSD955A - DVC PRO CAMCORDER PDF manuals and user guides View all Panasonic AJSD955A manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AJSD955A manual content summary:

  • Panasonic AJSD955A | AJSD930 User Guide - Page 1
    Digital Video Cassette Recorder Operating Instructions AJ- P AJ- Model No. P Before operating this product, please read the instructions carefully and save this manual for future use. P Printed in Japan S0802W @ VQT9955
  • Panasonic AJSD955A | AJSD930 User Guide - Page 2
    and maintenance (service) instructions in the instructions and do not make any unauthorized modifications. This equipment has been tested and found to comply with the limits for a class A digital with the instruction manual, may cause Panasonic authorized service center for assistance in selecting
  • Panasonic AJSD955A | AJSD930 User Guide - Page 3
    13 Connections 15 Tapes 17 Jog/Shuttle 18 Manual editing SD955A 19 Preroll SD955A 19 Automatic Introduction The AJ-SD930 and AJ-SD955A are multi-purpose studio digital VTRs which instructions include descriptions for both the AJ-SD955A and AJ-SD930. Descriptions which concern only the AJ
  • Panasonic AJSD955A | AJSD930 User Guide - Page 4
    tapes containing material shot with a consumer digital camera or the like can be played back on this unit. A cassette adapter (AJ-CS455P) is necessary when a mini DV cassette tape is to be used. Digital slow motion/jog dial Panasonic's original digital slow-motion technology makes it possible to
  • Panasonic AJSD955A | AJSD930 User Guide - Page 5
    signals to be recorded on the tape CH1 : Analog input signals CH2 : AES/EBU digital signals CH3 : SDI input digital signals CH4 : Analog input signals O It is possible to inhibit input cannot be selected unless one of the optional boards (AJYA931G, AJ-YAC930G) has been installed. 5
  • Panasonic AJSD955A | AJSD930 User Guide - Page 6
    start playback. When this button is pressed together with the REC button, recording starts. On the AJ-SD955A, when this button is pressed together with the EDIT button during playback, manual editing starts. However, manual editing will not be initiated if the servo is not locked. When only the PLAY
  • Panasonic AJSD955A | AJSD930 User Guide - Page 7
    Parts and their functions Front panel DC =>B? ON POWER OFF DVCPRO DVCPRO 50 DV METER FULL/FINE L MONITOR SELECT R HEADPHONES MONITOR MIX INPUT SELECT PREVIEW/PREVIEW AUTO EDIT PREROLL VIDEO AUDIO COUNTER ASSEM VIDEO CUE TC STAND BY PLAYER RECORDER RESET CH1 CH2 CH3 CH4 A IN INSERT
  • Panasonic AJSD955A | AJSD930 User Guide - Page 8
    ; conversely, when the - button is pressed, it is moved back by one frame. I PREROLL button SD955A This button is used to locate where a transmission or manual editing starts on the tape. When it is pressed, the tape travels to the preroll point and stops. The preroll time can be set using
  • Panasonic AJSD955A | AJSD930 User Guide - Page 9
    value. When the TC or UB value is to be set, this button is pressed first to stop the data from advancing. The set of digits whose display is flashing is then changed. T MENU button When this button is pressed, the setup menus are displayed on the TV monitor (but only
  • Panasonic AJSD955A | AJSD930 User Guide - Page 10
    Parts and their functions Front panel ON POWER OFF DVCPRO DVCPRO 50 DV METER FULL/FINE L MONITOR SELECT R HEADPHONES MONITOR MIX INPUT SELECT PREVIEW/PREVIEW AUTO EDIT PREROLL VIDEO AUDIO COUNTER ASSEM VIDEO CUE TC STAND BY PLAYER RECORDER RESET CH1 CH2 CH3 CH4 A IN INSERT TRIM A OUT
  • Panasonic AJSD955A | AJSD930 User Guide - Page 11
    interlace systems by setting setup menu item No. 070 (TV SYSTEM). With the AJ-SD930, only the 525 interlace TV system can be used. 525 : This lights when composite video signals (option) SDI : Serial digital video signals SDTI/1394 : Compressed digital signals (option) SG/SG 1/SG 2: Internal
  • Panasonic AJSD955A | AJSD930 User Guide - Page 12
    Parts and their functions Display panel 525 625 dB dB dB 0 0 0 -4 -4 -4 -8 -8 -8 -12 -12 -12 -16 -16 -16 REMOTE VIDEO AUDIO SCH SERVO dB Y PB PR ANALOG 0 CUE CMPST AES/EBU = EDIT REC INH 8 -4 dB USER SET DVCPRO -8 -8 -12 -12 -16 -16 SDI SDI SDTI/1394 SDTI/1394
  • Panasonic AJSD955A | AJSD930 User Guide - Page 13
    3 (SUPER) OPTION SDTI IN OUT CH3 CH4 MON R 1 2 SERVICE ONLY 1 AC IN socket Connect one end of the power cord supplied to this selected using the SUPER switch W on the front panel. The digital audio signals which are to be input to these connectors must be synchronized with
  • Panasonic AJSD955A | AJSD930 User Guide - Page 14
    CH1 AUDIO CH2 MON OUT L 3 (SUPER) OPTION SDTI IN OUT CH3 CH4 MON R 1 2 SERVICE ONLY > ?@ A BC D < Fan This fan is used to cool down the VTR. If, (optional) When the SDTI board (AJ-YAC930G, optional accessory) is installed in this VTR, digital data can be input and output using
  • Panasonic AJSD955A | AJSD930 User Guide - Page 15
    IN OUT 1 ACTIVE THROUGH 2 CH1 AUDIO CH2 MON OUT L 3 (SUPER) OPTION SDTI IN OUT CH3 CH4 MON R 1 2 SERVICE ONLY To video monitor device To audio monitor device Digital audio To video monitor device To audio monitor device Analog video signal (component) OWhen the analog video
  • Panasonic AJSD955A | AJSD930 User Guide - Page 16
    Video monitor signals Audio monitor signals Video monitor signals Audio monitor signals AV monitor OWhen an editing controller made by CMX is used, support must be provided at the editing controller side. OIf the remote signal (9 pin) connection is to be disconnected from one component and
  • Panasonic AJSD955A | AJSD930 User Guide - Page 17
    that tapes bearing the Panasonic brand be used as the consumer-use DV AJ-5P23MP, AJ-5P33MP) L cassettes Tapes capable of up to 92 minutes of recording or playback (AJ-5P63LP, AJ-5P92LP) OUse AJ-5P92LP tapes which have been recorded using the DVCPRO (25M) format in a VTR that supports
  • Panasonic AJSD955A | AJSD930 User Guide - Page 18
    Jog/Shuttle Jog mode Shuttle mode 1 Press the search dial so that it remains pressed in. Check that the JOG lamp has lighted. 2 Turn the search dial. The dial's click-stops are released, and the tape is played back at the speed (-1a to +1a) corresponding to the speed at which the dial is turned.
  • Panasonic AJSD955A | AJSD930 User Guide - Page 19
    Manual editing SD955A 1 Select the editing mode. ASSEMBLE: Assemble (frame-to-frame continuity) editing is performed in this mode. INSERT: Insert editing is performed in this
  • Panasonic AJSD955A | AJSD930 User Guide - Page 20
    Automatic editing (deck-to-deck) SD955A Switch settings and adjustments When using the AJ-SD955A as the recorder 1 Set the POWER switch to ON. When using the AJ-SD955A as the player 1 Set the POWER switch to ON. 2 Use the INPUT SELECT buttons to select the video and audio input signals. 3 Switch
  • Panasonic AJSD955A | AJSD930 User Guide - Page 21
    Automatic editing (deck-to-deck) SD955A Selecting the editing mode Registering the edit points 1 Select the editing mode. For assemble editing, press the ASSEM button. For insert editing, press the INSERT button. ASSEM: This sets the unit to assemble (frame-to-frame continuity) editing mode.
  • Panasonic AJSD955A | AJSD930 User Guide - Page 22
    Automatic editing (deck-to-deck) SD955A Checking and previewing edit points 1 Press the IN (or OUT) button to check the edit point. The value of the registered edit point appears on the display panel. 2 While holding down the IN (or OUT) button, press the PREROLL button and check the picture at the
  • Panasonic AJSD955A | AJSD930 User Guide - Page 23
    Automatic editing (deck-to-deck) SD955A Modifying edit points 1 Re-registering an edit point Locate the new edit point by performing the jog or shuttle operation, and press the IN (or OUT) button and SET button at the same time to re-register the edit point. 2 Modifying an edit point in 1-frame
  • Panasonic AJSD955A | AJSD930 User Guide - Page 24
    Automatic editing (deck-to-deck) SD955A Executing and reviewing automatic editing 1 Press the AUTO EDIT button. Automatic editing is now executed. O To suspend editing at any time, press the STOP button. O When the edit OUT point is reached, the tape is post-rolled, after which it stops. Post-
  • Panasonic AJSD955A | AJSD930 User Guide - Page 25
    Audio split editing SD955A The video edit points and audio edit points can be registered independently, and editing can be executed with the video point offset from the audio points. Audio edit points cannot be registered when the assemble editing mode has been selected. After registering the edit
  • Panasonic AJSD955A | AJSD930 User Guide - Page 26
    Audio split editing SD955A $ Duration display The duration can be indicated on the display panel only. Between the video IN and OUT points: Press the IN button and OUT button at the same time. Between the audio IN and OUT points: Press the A IN button and A OUT button at the same time. Match frame
  • Panasonic AJSD955A | AJSD930 User Guide - Page 27
    Variable memory editing SD955A Using the unit as a controller (deck-to-deck editing mode recorder) to control the playback speed of the VTR used as the player, editing can be performed in speed variable mode. $ Selecting the variable memory mode When deck-to-deck editing (either the RECORDER or
  • Panasonic AJSD955A | AJSD930 User Guide - Page 28
    Setup (initial settings) This VTR's main settings are performed while making selections using a system of menus. If a TV monitor has been connected to the VIDEO OUT 3 connector or SDI OUT 3 connector on the rear panel, the setting menus are displayed on the TV monitor. 43 ON POWER OFF DVCPRO
  • Panasonic AJSD955A | AJSD930 User Guide - Page 29
    Setup menus This VTR can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use. Changing the file 1 Press the MENU button. 2 When the FF button is pressed while holding down the DIAG button, the next user file is selected;
  • Panasonic AJSD955A | AJSD930 User Guide - Page 30
    Setup menus Loading user files The contents of the USER2, USER3, USER4 or USER5 file can be copied (loaded) into the USER1 file. Also, the contents of the USER1 file can be copied (saved) into the USER2, USER3, USER4 or USER5 file. USER 1 Load/save Load/save Load/save Load/save USER 2 Lock
  • Panasonic AJSD955A | AJSD930 User Guide - Page 31
    Setup menus Saving user files 1 Press the MENU button. 2 Press the REW button or FF button while holding down the DIAG button to select the USER1 file. 3 Turn the search dial to move the cursor (2) on the menu screen to No. A01 (SAVE). SETUP-MENU MENU NO.A00-0000 804 BLANK LINE BLANK
  • Panasonic AJSD955A | AJSD930 User Guide - Page 32
    Setup menus SYSTEM menu No./Item Description 00 WFM SEL 10 ENCODER SEL 11 This selects the signal to output from the VIDEO OUT 2 connector. 0000 CTL : The CTL signal is output. 0001 TC : The TIME CODE signal is output. 0002 VIDEO : The VIDEO OUT signal is output. 0003 RF_L : The PB L RF
  • Panasonic AJSD955A | AJSD930 User Guide - Page 33
    Setup menus SYSTEM menu No./Item Description 18 System phase adjustment. SYS H OFFSET 19 SYS SC/H 0000 -3 : -13.4 µsec 0001 -2 : -8.96 µsec 0002 -1 : -4.52 µsec 0003 0 : 0 sec 0004 1 : +4.52 µsec 0005 2 : +8.96 µsec 0006 3 : +13.4 µsec Factory settings will remain
  • Panasonic AJSD955A | AJSD930 User Guide - Page 34
    buttons can be operated. 0001 ST&EJ : Only the STOP and EJECT buttons can be operated. 0002 ENA : AJ-SD955A: All buttons except for the RECORDER and PLAYER buttons can be operated. AJ-SD930: All buttons can be operated. This selects the 12 or 24 hour display for the CTL counter. 0000 0001
  • Panasonic AJSD955A | AJSD930 User Guide - Page 35
    setting. No./Item Description 013 PB FORMAT 015 SD955A MONI CONTROL This sets the format in which the tape is to be played back. 0000 MANUAL : The format complies with the setting of setup menu No. 012 (SYS FORMAT) when a DVCPRO cassette is inserted. The format complies to the format recorded
  • Panasonic AJSD955A | AJSD930 User Guide - Page 36
    Setup menus USER menu No./Item Description 100 This selects the direct search dial operation. SEARCH ENA 101 SHTL MAX 102 FF. REW MAX 104 REF ALARM 0000 DIAL : For direct search dial operations. 0001 KEY : Operation is not transferred to the search mode unless the search button is
  • Panasonic AJSD955A | AJSD930 User Guide - Page 37
    Setup menus USER menu No./Item Description No./Item Description 109 AUTO REW 110 MEMORY STOP This selects whether to rewind the tape automatically to the tape start when the tape end is detected. 0000 0001 OFF : The tape stops at the tape end. ON : The tape is rewound to the
  • Panasonic AJSD955A | AJSD930 User Guide - Page 38
    Setup menus USER menu No./Item Description 114 REC INH LAMP This selects whether to cause the REC INH lamp to flash or light up when the cassette has been set to the accidental erasure prevention status. 115 EJECT SW INH 116 EJECT LAMP 0000 LIGHT : The lamp lights up. 0001 FLASH :
  • Panasonic AJSD955A | AJSD930 User Guide - Page 39
    0002 ORIG OID information of any VTR except for the DVCPRO's is set in OTHER. OThe ORIG setting should only be used when a Panasonic controller (AG-A850 etc. sold separately) is connected. This selects whether the PARALLEL (25P) connector functions when the CONTROL switch has been set to
  • Panasonic AJSD955A | AJSD930 User Guide - Page 40
    Use the non-standard (N-STD) setting when video or audio trouble occurs with signals from laser discs or a satellite. This selects the video analog audio preset when editing the digital audio of the VTR using a controller which does not have a digital audio edit preset control function.
  • Panasonic AJSD955A | AJSD930 User Guide - Page 41
    ON : Simultaneous playback Simultaneous playback is valid when the MODE switch is set to TAPE. This selects the connection method for the digital audio edit IN point. 0000 CUT : Cut processing 0001 FADE : V Fade processing 312 AUD EDIT OUT This selects the connection method for the
  • Panasonic AJSD955A | AJSD930 User Guide - Page 42
    Setup menus USER menu No./Item Description 400 STILL TIMER This selects the time to be taken until the unit goes into the tape protection mode when it is left standing in the stop or search still (JOG/SLOW/SHTL) mode. (Unit: s = second, min = minute) 401 SRC PROTECT 0000 0001
  • Panasonic AJSD955A | AJSD930 User Guide - Page 43
    Setup menus USER menu No./Item Description 500 VITC BLANK For selecting whether to output the VITC signal at the positions selected by setup menu items No. 501 (VITC POS-1) and No. 502 (VITC POS-2). 501 VITC POS-1 502 VITC POS-2 503 TCG REGEN 0000 BLANK : VITC signals are not
  • Panasonic AJSD955A | AJSD930 User Guide - Page 44
    Setup menus USER menu No./Item Description 511 VITC OUT 512 TC OUT ADV This selects how the VITC which is to be superimposed onto the output video signal is to be output. 0000 SBC : During recording: The input time code, which was selected by the setup menu No. 505 (EXT TC SEL)
  • Panasonic AJSD955A | AJSD930 User Guide - Page 45
    0000 M II : M II level 0001 B-CAM : ß-CAM level OThis setup menu is not displayed in the 625i system. OWhen no optional board (AJ-YA931G) has been installed, setup menu No. 610 is not displayed. 611 This selects Y/C separation processing for the composite input signals. YC SEP MODE 0000
  • Panasonic AJSD955A | AJSD930 User Guide - Page 46
    form. 0001 CUT : The signal is recorded with the 7.5% setup removed. This selects the 7.5% setup processing for the output composite, component and serial (digital) signal. 0000 THRU : The signal is output in its original form. 0001 CUT : The signal is output with the 7.5% setup removed. 0002 ADD
  • Panasonic AJSD955A | AJSD930 User Guide - Page 47
    form. 0001 CUT : The signal is recorded with the 7.5% setup removed. This selects the 7.5% setup processing for the output composite, component and serial (digital) signal. 0000 THRU : The signal is output in its original form. 0001 CUT : The signal is output with the 7.5% setup removed. 0002 ADD
  • Panasonic AJSD955A | AJSD930 User Guide - Page 48
    been selected by pressing the unit's AUDIO input selector button. 0000 0001 AES : AES/EBU input SIF : Serial input This selects the CH3 and CH4 digital input when USER SET has been selected by pressing the unit's AUDIO input selector button. 0000 0001 AES : AES/EBU input SIF : Serial input The
  • Panasonic AJSD955A | AJSD930 User Guide - Page 49
    Setup menus USER menu No./Item Description 721 This selects the monitor output. MONI CH SEL 722 REC CH1 723 REC CH2 724 REC CH3 725 REC CH4 0000 MANU : The output signal is as selected in MONITOR SELECT buttons. 0001 AUTO : PCM AUDIO output is selected within the -0.43 (-0.5)a to +1a
  • Panasonic AJSD955A | AJSD930 User Guide - Page 50
    Setup menus USER menu No./Item Description 734 This selects whether the operation of the MONITOR SELECT button on the front panel MONI SEL INH is to be enabled or disabled. 735 MON AUTO SEL 0000 OFF : Operation is enabled. 0001 ON : Operation is disabled. 0002 ON1 : Operation is
  • Panasonic AJSD955A | AJSD930 User Guide - Page 51
    Setup menus USER menu No./Item Description 800 ADD LINE 25 Sub-screen 00 REC LINE1 For selecting the mode for recording signals on additional lines. 0000 OFF : No signals are recorded on additional lines. 0001 YC422 : The 422 mode signals are recorded on 1 line. 0002 YC411 : The
  • Panasonic AJSD955A | AJSD930 User Guide - Page 52
    Setup menus USER menu No./Item Description 801 ADD LINE 50 Sub-screen 00 REC LINE1 For selecting the mode for recording signals on additional lines. 0000 OFF : No signals are recorded on additional lines. 0001 YC422 : The 422 mode signals are recorded on 2 lines. 0002 Y4_B/W :
  • Panasonic AJSD955A | AJSD930 User Guide - Page 53
    Setup menus USER menu No./Item Description No./Item Description 803 TELETEXT DET Sub-screen For selecting the method used to detect the lines in which the teletext signals are to be recorded. 0000 OFF : The teletext signals are not recorded. 0001 AUTO : The teletext signals are
  • Panasonic AJSD955A | AJSD930 User Guide - Page 54
    Setup menus USER menu No./Item Description No./Item Description A00 LOAD A01 SAVE A02 P. ON LOAD This selects the user file whose contents will be loaded into USER1. 0000 USER2 : The USER2 file contents are loaded. 0001 USER3 : The USER3 file contents are loaded. 0002 USER4 : The USER4
  • Panasonic AJSD955A | AJSD930 User Guide - Page 55
    TC PRESET button to set the start number of the time code or user's bit. 1 Press the TC PRESET button. The left-most set of digits starts flashing. 2 To change the value, turn the search dial while holding down the SEARCH button. 3Turn the search dial to select the set of
  • Panasonic AJSD955A | AJSD930 User Guide - Page 56
    Time code/user bit Setting the external time code Reproducing the time code/user bit 1 Set the VTR to stop mode. 1 Set the VTR to stop mode. 2 Select "TC" using the COUNTER button. 2 Select "TC" or "UB" using the COUNTER button. 3 Set the TCG switch to EXT. (External time code selection) 4
  • Panasonic AJSD955A | AJSD930 User Guide - Page 57
    Superimpose screen The control signals, time code, etc. are displayed using abbreviations. TV monitor Characters displayed The background of characters superimposed on the display can be changed using setup menu No. 011 (CHARA TYPE). TCR 22 : 22 : 22 : 22 TCR 22 : 22 : 22 : 22 TCR 22 : 22 : 22
  • Panasonic AJSD955A | AJSD930 User Guide - Page 58
    Video output signals and servo reference signal This section explains how the output signals and servo reference signal are selected. External synchronization of video output signals The video output signals are output in synchronization with the REF VIDEO input signal or video input signal. As
  • Panasonic AJSD955A | AJSD930 User Guide - Page 59
    Video output signals and servo reference signal Servo reference signal The REF VIDEO input signal or video input signal is selected as the servo reference signal. As shown in the figure below, the signal is selected in accordance with the setup menu settings, VTR mode and availability of the video
  • Panasonic AJSD955A | AJSD930 User Guide - Page 60
    Audio V fade function When editing tapes, the edit point splicing selection (setup menu No. 311 and 312) information is recorded on the tape. This information is then sensed during playback, and V fade or cut processing is automatically performed for these sections. However, only when the playback
  • Panasonic AJSD955A | AJSD930 User Guide - Page 61
    Audio recording channel and monitor output selection Audio recording channel Monitor output channel The audio recording channels are selected on the AUDIO setup menu as shown below. Recording track CH1 CH2 CH3 CH4 CUE Recording signal CH1 input/CH2 input/CH1 input+CH2 input CH1 input/CH2 input/
  • Panasonic AJSD955A | AJSD930 User Guide - Page 62
    number CC3061-99-0400) by Chassis Trak be used. (The complete slide rail and bracket unit is not available from Panasonic.) For further details, consult your dealer. 4 Attach the AJ-MA75P rack mount adapter using the same 4 screws. 1 Attach the inner members of the slide rails. Refer to the figure
  • Panasonic AJSD955A | AJSD930 User Guide - Page 63
    the video heads be cleaned as and when appropriate. For further details on how to actually clean the heads, consult with one of our service companies or with your dealer. Condensation Condensation occurs due to the same principle involved when droplets of water form on a window pane of a heated
  • Panasonic AJSD955A | AJSD930 User Guide - Page 64
    Error messages When a warning occurs in this unit, the error number is indicated on the counter display. Open the DIAG menu to display a description of the error on the counter display or monitor TV. When a operational malfunction has occurred in the unit, the error number flashes on the counter
  • Panasonic AJSD955A | AJSD930 User Guide - Page 65
    Error messages $ Displaying the "HOURS METER" information Turn the search dial to move the cursor (2). The description for the item where the cursor is located is shown on the counter display. If "T&S&M" is selected in the setup menu No. 008 (DISPLAY SEL), a message appears in the mode display
  • Panasonic AJSD955A | AJSD930 User Guide - Page 66
    Error messages Warning messages Priority High OMonitor display ODescription OVTR operation and corrective action E-04 (UNKNOWN SIG) This appears when the SDTI input signals are not DVCPRO or DV format signals. (The data stream format complies with the SMPTE 321M standard.) VTR: No recording
  • Panasonic AJSD955A | AJSD930 User Guide - Page 67
    Error messages Error messages Display ODescription OVTR operation and corrective action E-20 DEW If condensation is detected, the error number flashes and the unit transfers to eject mode. The drum rotates after the cassette is ejected to eliminate the condensation. Once the unit is released
  • Panasonic AJSD955A | AJSD930 User Guide - Page 68
    error number flashes on the display. VTR: STOP OSet the POWER switch to OFF and then to ON again. E-78 M-IF COMM ERROR If a problem has been encountered in communication between the servo microcomputer and mechanism relay board, this error number flashes on the display. VTR: STOP OSet the POWER
  • Panasonic AJSD955A | AJSD930 User Guide - Page 69
    menu item No. 209 "RETURN ACK". Hardware specifications External interface specifications O Connector specifications Connector: D-SUB 25-pin (crossover cable supported) Pin No. 1 2 3 4 5 6 7 20 Signal Description FG RXD TXD CTS RTS DTR SG DSR Protective ground (Frame ground) Received data
  • Panasonic AJSD955A | AJSD930 User Guide - Page 70
    RS-232C interface Software specifications (Protocol) 1. Communication parameters Communication Asynchronous, full duplex system Communication 300/600/1200/2400/4800/9600 speed Bit length 7bit/8 bit Stop bit 1 bit/2 bit Parity bit NONE/ODD/EVEN ACK code ACK code returned/ACK code not
  • Panasonic AJSD955A | AJSD930 User Guide - Page 71
    [ETX] 5 [ACK] [STX] OPL [ETX] $ When the communication has terminated abnormally [NACK] 15h $ When processing is not possible due to incorrect data or trouble in the VTR 1. The receive completion message is returned. [ACK] 06h 2. An error code is returned. [STX] [E R N1 N2 N3 ] [ETX] 02h Error
  • Panasonic AJSD955A | AJSD930 User Guide - Page 72
    RS-232C interface 5. Command table $ Commands relating to operation control O As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is subsequently returned. It is only the execution message which is listed in this table. O In the
  • Panasonic AJSD955A | AJSD930 User Guide - Page 73
    ) PREROLL OBF : STANDBY OFF OSF : SHTL FORWARD OSR : SHTL REVERSE OJG : JOG FORWARD/REVERSE OSW : VAR FORWARD/REVERSE EAE : AUTO EDIT EON : EDIT ON (MANUAL EDIT) EPV : PREVIEW ERV : REVIEW ID (VTR No.) REQUEST [STX] QID [ETX] 45 [STX] data [ETX] This command is for inquiring about the VTR used
  • Panasonic AJSD955A | AJSD930 User Guide - Page 74
    using the SDTI format (compressed digital interface) are enabled by installing the AJ-YAC930G SDTI board (optional accessory) CH2 MON OUT L 3 (SUPER) OPTION SDTI IN OUT CH3 CH4 MON R 1 2 SERVICE ONLY SDTI signals Recorder AC IN SIGNAL GND AES/EBU CH1/2 IN CH3/4 IN ANALOG VIDEO
  • Panasonic AJSD955A | AJSD930 User Guide - Page 75
    ) TIME CODE IN BNCa2, Active through BNCa2 (CH1/CH2, CH3/CH4) AES/EBU format XLRa4 (CH1, CH2, CH3, CH4) XLRa1 AUDIO OUT SDI OUT (DIGITAL) AUDIO OUT (DIGITAL) AUDIO OUT (ANALOG) TIME CODE OUT MONITOR OUT HEADPHONES (front) BNCa3 BNCa2 (CH1/CH2, CH3/CH4) AES/EBU format XLRa4 (CH1, CH2, CH3, CH4
  • Panasonic AJSD955A | AJSD930 User Guide - Page 76
    pins: TTL level, active low, 6100ms edge electrical signal. O STATUS pins: open collector, sink current 6 mA RS-232C D-SUB 25-pin (crossover cable supported) Pin No. 1 2 3 4 5 6 7 20 Signal Description FG RXD TXD CTS RTS DTR SG DSR Protective ground (Frame ground) Received data (Data is sent
  • Panasonic AJSD955A | AJSD930 User Guide - Page 77
    the support legs, connectors, and JOG dial) Recording format: DVCPRO50/DVCPRO format selectable Recording video signal: AJ-SD930 : 525i system AJ-SD955A : 525i/625i system selectable Recording audio signal: DVCPRO50: 48 kHz 16-bit 4 channels DVCPRO: 48 kHz 16-bit 2 channels Recording tracks: Digital
  • Panasonic AJSD955A | AJSD930 User Guide - Page 78
    chroma phase): ±30° Video output setup (black) level: ±14 IRE (±100 mV) Video output sync phase: ±15 µsec Video output SC phase: ±180° [AUDIO] $ Digital Audio Sampling frequencies: 48 kHz (synchronous with video) Quantizing: 16 bits Frequency response: 20 Hz to 20 kHz ±1.0 dB (at the reference level
  • Panasonic AJSD955A | AJSD930 User Guide - Page 79
  • Panasonic AJSD955A | AJSD930 User Guide - Page 80
    . Fax (800) 334-4880 Emergency after hour parts orders (800) 334-4881 TECHNICAL SUPPORT: Emergency 24 Hour Service (800) 222-0741 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-5010 Panasonic de Mexico S.A. de C.V. Av angel Urraza Num. 1209 Col. de Valle 03100 Mexico
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
VQT9955
Printed in Japan
S0802W
@
P
AJ-
P
Model No.
AJ-
P
Operating Instructions
Digital Video Cassette Recorder
Before operating this product, please read the instructions carefully and save this manual for future use.