Panasonic AJSD955A AJSD930 User Guide - Page 35

Setup menus USER menu No./Item Description 009 This sets the position of the characters on the horizontal plane for the time code and other CHARA H-POS super displays output to the VIDEO OUT 3/ SDI OUT 3 connector. 0000 0 : : 0004 4 : : 0016 16 When setting this item, the DISPLAY SEL status is output to VIDEO OUT 3/SDI OUT 3 even if SUPER OFF has been set. However, when the menu is exited, operation complies with the SUPER OFF/ON setting. Also, CHARA TYPE is output to VIDEO OUT 3/SDI OUT 3 according to the status set in the menu. 010 This sets the position of the characters on the vertical plane for the time code and other CHARA V-POS super displays output to the VIDEO OUT 3/ SDI OUT 3 connector. 011 CHARA TYPE [525i system] [625i system] SD955A 0000 0 0000 0 : : : : 0018 18 0023 23 : : : : 0022 22 0028 28 OWhen setting this item, the DISPLAY SEL status is output to VIDEO OUT 3/SDI OUT 3 even if SUPER OFF has been set. However, when the menu is exited, operation complies with the SUPER OFF/ON setting. OWhen the DISPLAY SEL setting causes characters to extend beyond the edges of the screen, the setting value is changed so that the characters are automatically displayed in a position on the screen. This selects the display type for the super display output to the VIDEO OUT 3/SDI OUT 3 connector as well as for displays such as the setting menu, etc. 012 SYS FORMAT 0000 0001 WHITE : White characters against a black background. W/OUT : White characters with a black border. This sets the VTR's recording and playback format. 0000 50M : DVCPRO50 (50 Mbps) is selected. 0001 25M : DVCPRO (25 Mbps) is selected. The format complies with the setting of this menu item when the tape is ejected. The underlined items indicates the initial setting. No./Item Description 013 PB FORMAT 015 SD955A MONI CONTROL This sets the format in which the tape is to be played back. 0000 MANUAL : The format complies with the setting of setup menu No. 012 (SYS FORMAT) when a DVCPRO cassette is inserted. The format complies to the format recorded on the tape when a DV or DVCAM cassette is inserted. 0001 AUTO : The format complies with the format recorded on the tape. OWhen an editing mode has been selected, the "MANUAL" setting is forcibly established for internal operations. OWhen AUTO has been selected, the picture and sound may be disturbed until the format is detected after a tape is loaded. This sets whether the recorder is to be forcibly set to the EE mode and the player's playback signals are to be output to the monitor by pressing the recorder's PLAYER button when a monitor has been connected only to the recorder during deck-to-deck editing. 017 CHARA SIZE 0000 MANU : The recorder is not forcibly set to the EE mode. 0001 AUTO : The recorder is forcibly set to the EE mode, and the player's playback signals are output. This selects the size of the characters for the superimposed display output from the VIDEO OUT 3 or SDI OUT 3 connector. 0000 NORMAL : Standard size 0001 LARGE : 4 times larger than the standard size 070 SD955A When LARGE has been selected, only time data is displayed, regardless of the setup menu No.008 (DISPLAY SEL) setting. This selects the TV system. TV SYSTEM 0000 0001 525 : The 525 interlace/59.94 Hz system is selected. 625 : The 625 interlace/50 Hz system is selected. After this setting is changed, turn off and back on the power again to take it effect. 35