Panasonic AJSD955A AJSD930 User Guide - Page 14
ANALOG COMPOSITE VIDEO OUT connectors
View all Panasonic AJSD955A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Parts and their functions Rear panel AC IN SIGNAL GND =< AES/EBU CH1/2 IN CH3/4 IN ANALOG VIDEO IN ON Y 75Ω OFF CH1/2 OUT CH3/4 OUT PB PR OPTION REF VIDEO IN ON 75Ω OFF Y 1 VIDEO OUT PB 2 (WFM) REMOTE REMOTE IN/OUT REMOTE OUT ENCODER REMOTE RS-232C PARALLEL PR 3 (SUPER) ANALOG CH1 PUSH AUDIO PUSH CH2 IN PUSH TC IN CH3 PUSH PUSH CH4 TC OUT SDI IN OUT 1 ACTIVE THROUGH 2 CH1 AUDIO CH2 MON OUT L 3 (SUPER) OPTION SDTI IN OUT CH3 CH4 MON R 1 2 SERVICE ONLY > ?@ A BC D < Fan This fan is used to cool down the VTR. If, for any reason, the fan stops, "E-10" will appear on the counter display. = SIGNAL GND terminal This is connected to the signal ground terminal on the component connected to this VTR in order to minimize noise. It is not a safety ground. A PARALLEL REMOTE connector This connector is used when the VTR is to be operated by an external component. B ANALOG AUDIO OUT connectors The analog audio signals are output through these connectors. C MONITOR OUT connectors During playback, the PCM audio signals (CH1/CH2/CH3/CH4) or playback signals from the CUE track are output through these connectors. D SDTI input and output connectors (optional) When the SDTI board (AJ-YAC930G, optional accessory) is installed in this VTR, digital data can be input and output using the SDTI (Serial Data Transport Interface) format. > ANALOG COMPONENT VIDEO OUT connectors The analog component video signals are output through these connectors. ? ANALOG COMPOSITE VIDEO OUT connectors The analog composite video signals are output through these connectors. The waveform monitor (WFM) signal can be output from the VIDEO OUT 2 connector. It can be selected using setup menu No. 00 (WFM SEL). Video signals containing superimposed information can be output through the VIDEO OUT 3 connector. Whether the superimposing is to be set ON or OFF is selected using the SUPER switch W on the front panel. @ RS-232C connector A personal computer or other component can be connected to this connector to operate the VTR. 14