Panasonic AKHC900P AKHC900 User Guide - Page 8

How to Install Be sure to ask the dealer for the installation, adjustment and connection of this equipment. _ How to set the lens ≥ Standard 2/3q bayonet type (B4 mount) lens of any makers can be used*. 1 Turn the lens fixing ring knob counterclockwise to remove the lens mount cap. 2 Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the lens. 3 Connect the lens cable to the lens connector. 4 Connect the remote (zoom/focus control) cable to the zoom/focus connector on the rear panel. * Note that there are some lenses uncontrollable with respect to zoom, focus function. Remote (zoom/focus control) Cable BREAKER ZOOM/ FOCUS (When a pan/tilt head is used, connect the cable to the pan/tilt head.) 1 SDI OUT 2 Camera Cable (To Lens Connector) 7 2 0 PROGRESSIVE 1/ F Lens Fixing Ring Knob _ How to install on the camera housing, pan/tilt head, tripod, etc. 1 Precisely set the camera on the camera housing, pan/tilt head, tripod, etc. by using the camera set-screw hole (1/4-20UNC, 3/8-16UNC). 2 When mounting the camera on a pan/tilt head, be sure to use proper tools and make sure that there is no fear of falling off. 8