Panasonic AKHC900P AKHC900 User Guide - Page 9

How to Set Up the System (Connection) _ Connection of remote control box ≥ Use multi-cable for the connection of HD controller AK-HRP900 and this unit. BREAKER ZOOM/ FOCUS Coaxial Cable HD-SDI (5C-FB) 1 SDI OUT 2 D-sub 15-pin 1/ F AK-HC900P Multi-cable (5m) AK-HDMLTCA05 Video Input Signal HD Monitor NOTE Note that the monitor output is attenuated and deteriorated if the cable is too long. YPbPr HD Monitor O I AC Adaptor AW-PS505 External sync signal (3 value sync) DC Power Cable D-sub 15-pin HD Controller AK-HRP900*1 1 Before connecting the cables, be sure to set the Power Switch of AC Adaptor and HD Controller to OFF. 2 Connect the multi-cable to the interface connector of the camera, and the opposite side to HD Controller. 3 Set the AC Adaptor Power Switch to ON, and the HD Controller Power Switch to ON, then the camera can be controlled. 4 After shooting, set the HD Controller Power Switch to OFF, and the AC Adaptor Power Switch to OFF. *1 To be sold in September 2002 9