Panasonic AU-XPD1 Operating Instructions - Page 11

Removing a P2 Card 1 Flip up the EJECT button in the direction of the arrow. 2 Press the EJECT button. The P2 card will slide out far enough to allow you to remove it. EJECT button ◆NOTE: • To remove a P2 card on a Mac, drag the P2 card icon to the Trash. Then check that the icon has disappeared and the access indicator on the P2 drive has turned off before physically removing the P2 card. • Do not remove a P2 card that is being accessed. Removing a P2 card during access may cause the P2 drive to malfunction. Should this happen, reconnect the two USB cables. Write-protecting a P2 Card A P2 card has a write-protect switch. Setting this switch to "PROTECT" can prevent writing and deleting of data. Note: The write-protect switch is not effective when the P2 card is inserted in the P2 drive. Make sure you remove the P2 card from the P2 drive, set the switch, then re-insert the card, in order to effect the switch setting. P2 card 1305&$5 To prevent the writing and deleting of data when using a Memory Card Adapter (AJP2AD1), set the memory card write-protect switch on the adapter. Write-protect switch 11