Panasonic AU-XPD1 Operating Instructions - Page 7
Parts and their Functions - red light
View all Panasonic AU-XPD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Parts and their Functions ᶃ ᶄᶅ ᶆᶇ ᶈ A Access indicator Lights green during P2 card access. ◆ NOTE: • This blinks rapidly in red when the power supply is insufficient. ( page 8) • Do not remove a P2 card during access. The file data could be corrupted or the P2 card could be damaged. B P2 Card slot Insert a P2 card. The P2 drive is designed for P2 cards and does not work with other cards. C EJECT button Press this button to remove a P2 card from the P2 drive. D USB 3.0 connector (POWER connector) Use the supplied USB cables to connect this connector to a USB 3.0 port on a personal computer to power the P2 drive from the computer. E USB 3.0 connector (SIGNAL connector) Use the supplied USB cables to connect this connector to a USB 3.0 port on a personal computer to transfer data and to power the P2 drive from the computer. F FAN This is the vent for the unit's cooling fan. The fan operates automatically depending on the operating temperature. Make sure the vent is not obstructed while operating the unit. ◆ NOTE: • If a malfunction occurs with the fan motor, the access indicator will blink slowly (about 1-second intervals) in red. ◆ NOTE: • Do not use the P2 drive in an upright position. Otherwise malfunction or damage to the P2 drive may occur. 7