Panasonic AW-HE130 Brochure - Page 5
Exceptional Pan-Tilt mechanism performance, for smooth moves during video capture., Other Functions - manual
View all Panasonic AW-HE130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Exceptional Pan-Tilt mechanism performance for smooth moves during video capture. Thanks to a highly evolved pan-tilt design, the AW-HE130W/K achieves smoother and more natural movement during on-air shots. The pan-tilt head also has a wide shooting range*, with a pan range of ±175° and a tilt range of -30° to 210° . The newly developed pan-tilt drive provides high-speed operation at maximum 60°/s, excellent response to remote control operation, and highly precise stop control. These features combine to accurately capture fast-action sports scenes or smooth concert footage. The noise level during operation is also very low, at NC35 or less, which is ideal for use in quiet environments. * Depending on the position of the pan and tilt, its own unit may be reflected in the image. front Top view R90 Side view 210° 30° 175° 175° Other Functions Equipped with ND lters (Through, 1/8, 1/64). Equipped with four types of scene les that can be set by the user. Preset memory of up to 100 positions. Functions such as freeze during preset, digital extender zoom, color temperature settings can be assigned to the user buttons on Panasonic controllers. Equipped with RS422 remote terminal; up to ve units can be controlled via serial control from a controller. Equipped with RS232C remote terminal (Standard serial communication support). Up to four units can be operated with a wireless remote controller (AW-RM50G sold separately). Easy installation thanks to use of turn-lock mechanism. Color variations (black/white) that can be chosen for different applications or conditions. System con guration example HD Integrated Camera AW-HE130W/K SDI video signal HD Integrated Camera AW-HE130W/K Video Signals Control Signals AC adaptor/ External DC Power Supply Compact Live Switcher AW-HS50 *The AC adaptor provided with the unit is not shown in the above figure. Monitor1 Monitor2 PoE+Hub or Switching Hub Monitor LAN cable (straight cable) LAN cable (straight cable) Remote Camera Controller AW-RP120G Speci cations GENERAL Power requirements DC 12 V (AC adaptor supplied) DC 42 - 57 V (PoE+ power supply) Current consumption 1.8 A (AC adaptor supplied) 0.6 A (PoE+ power supply) Ambient operating temperature 0 °C to 40 °C (32 °F to 104 °F) Storage temperature -20 °C to 50 °C (-4 °F to 122 °F) Allowable humidity ranges 20 % to 90 % (no condensation) Mass Approx. 3.1 kg (6.83 lb) [Including mount bracket] Dimensions (W x H x D) 180 mm × 228 mm × 234 mm (7-3/32 inches x 9 inches x 9-3/16 inches) (excluding protrusions, cable cover, direct ceiling mount bracket) Gain selection Frame mix*2 Electronic shutter speed Auto, 0 dB to 36 dB 0 dB, 6 dB, 12 dB, 18 dB, 24 dB 59.94p/59.94i: 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 29.97p: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 23.98p: 1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Finish Controller supported*1 AW-HE130WP/AW-HE130WE: Pearl white AW-HE130KP/AW-HE130KE: Metallic black AW-RP120, AW-RP50, AK-HRP200 INPUT OUTPUT Input connector DC 12 V IN, G/L IN (BNC) • BBS (Black Burst Sync), tri-level sync supported • Locking to a color subcarrier is not possible with BBS. PoE+ (IEEE802.3at standard) Video output HDMI connector HDMI • HDCP is not supported. • Viera Link is not supported. HD/SD SDI OUT SMPTE424/SMPTE292/SMPTE259 standards 75 Ω (BNC×1) VIDEO OUT NTSC/PAL 1.0 V [p-p]/75 Ω (BNC×1) LAN LAN connector for IP control (RJ-45) RS-422 CONTROL IN RS-422A (RJ-45) Synchro scan Gamma White balance Chroma amount variability FUNCTIONS Scene file AND PERFORMANCE Output format INPUT/ OUTPUT Input/ Output connector MIC/LINE input φ3.5 mm stereo mini jack Input impedance: High impedance • During MIC input Supported mic: Stereo mic (plug-in power ,on/off switching via menu) • Supply voltage: 2.5 V ± 0.5 V Mic input sensitivity: Approx. -40 dBV ± 3 dBV (0 dB=1 V/Pa, 1 kHz) • During LINE input Input level: Approx. -10 dBV ±3 dBV Synchronization system [Pan-tilt head unit] Installation method [Camera unit] Imaging sensors 1/2.86-type Full-HD 3MOS Camera/pan-tilt head control FUNCTIONS AND PERFORMANCE Motorized 20 zoom, F1.6 to F3.4 Lens (f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm) Focus Switching between auto and manual Focus distance Entire zooming range: 800 mm (2.62 ft) Wide end: 400 mm (1.31 ft) Color separation optical system 3MOS Minimum illumination 2 lx (50 %, F1.6, 36 dB) Horizontal resolution 1000 TV lines Typ (Center area) Pan-tilt operation speed Panning range Tilting range*7 Quietness 50p/50i: 1/60, 1/120, 1/250, 1/500,1/1000, 1/2000, 1/4000, 1/10000 1/25, 1/60, 1/120, 1/250, 1/500, 25p: 1/1000, 1/2000,1/4000,1/10000 59.94 Hz:60.15 Hz to 642.21 Hz 50 Hz:50.15 Hz to 535.71 Hz HD, SD, FILMLIKE1, FILMLIKE2, FILMLIKE3 0.30 to 0.75 (Manual setting) AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K) OFF, -99 % to 40 % Scene1, Scene2, Scene3, Scene4 1080/59.94p,1080/29.97p*3,1080/23.98p, 1080/59.94i,1080/29.97PsF,1080/23.98PsF, 720/59.94p,480/59.94p(i)*4,1080/50p,1080/25p*3, 1080/50i,80/25PsF,720/50p,576/50p(i)*4 Internal/External synchronization (BBS/Tri-level sync) Stand-alone (Desktop) or suspended (Hanging)*5 IP connecting cable • When connecting through a hub: LAN cable*6 (category 5e or above, straight cable), max. 100 m (328 ft) • When a hub is not used LAN cable*6 (category 5 or above, crossover cable) max.100 m (328 ft) RP connecting Cable LAN cable*6 (category 5 or above, straight cable), max. 1000 m (3280 ft) RS-422A, AW series protocol 0.08°/s to 60°/s ±175° -30° to 210° NC35 or less *1: It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website. http://pro-av.panasonic.net/ *2: This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF 1080/23.98PsF, 1080/25p, or 1080/25PsF. *3: Native output *4: A 'P' signal is output as HDMI output, an 'I' signal is output as SDI and an analog output for output formats of 480/59.94p(i) and 576/50p(i). *5: To ensure safety, the unit must be secured using the mount bracket supplied. *6: Use of an STP (shielded twisted pair) cable is recommended. *7: Depending on the pan or tilt position, the camera may be reflected in the image.