Panasonic BB-HCM581A-W Installation Guide - Page 1

Panasonic BB-HCM581A-W - 21x Optical Zoom PoE Pan/Tilt Network Camera Manual

Page 1 highlights

Installation Guide Network Camera Indoor Use Only Please read this document before using the product, and save this document for future reference. Panasonic Network Camera Website: http://www.panasonic.com/netcam for customers in the USA and Puerto Rico BB-HCM580A Model No. (AC Adaptor Type) BB-HCM581A (PoE Ready) This manual is written for both the BB-HCM580A (AC Adaptor Type) and the BB-HCM581A (PoE Ready). Available features and operations vary slightly depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera. Please read the included Important Information before proceeding. Complete Operating Instructions and all other documentation can be found on the included CD-ROM. • This document (Installation Guide) explains how to physically connect the camera to the power supply and network, as well how to mount or place the camera for regular use. • The Setup Guide describes how to set up the camera so that it can be accessed using a PC. • Refer to the Operating Instructions on the CD-ROM for details regarding the camera's features. • Refer to the Troubleshooting Guide on the CD-ROM if you have any problems configuring or using the camera. Abbreviations • UPnP is the abbreviation for "Universal Plug and Play". • The Network Camera is referred to as "the camera" in this document. • The Setup CD-ROM is referred to as "the CD-ROM" in this document. Installation Procedure Overview The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted. Preparation Confirm that you have all the items required for installation. Camera Diagram Make sure you know the names of the camera's physical features. Connections Connecting the camera to your network and to the power outlet. Setup Setting up the camera (described in the included Setup Guide). This involves configuring the camera so that it can be accessed from a PC. Mounting Mounting or placing the camera. Preparation 1. Confirm the following items are included in the camera's packaging. • Additional pieces can be ordered by calling 1-800-332-5368. Main Unit (1 pc.) Washer S (1 pc.) Order No. XWG26D12VW Used when securing the safety wire to the camera. Washer L (1 pc.) Order No. XWG4F16VW Used when securing the safety wire to the ceiling. Screw A (2 pcs.) Order No. XYN3+J6FJ Used to secure ceiling plate A to ceiling plate B. Ceiling Mounting Cover (1 pc.) Order No. PSKL1023Y2 Used when mounting the camera on a ceiling. Screw B (5 pcs.) Order No. XTB4+20AFJ Used to secure ceiling plate B (4 pcs.) and the safety wire (1 pc.) to the ceiling. Ceiling Plate A (1 pc.) Order No. PQZMHCM581A Used to secure the camera to ceiling plate B. Screw C (1 pc.) Order No. PQHV2610PJ65 Used for connecting the safety wire to the camera. Ceiling Plate B (1 pc.) Order No. PQMD10110Z Used to secure the camera to the ceiling. AC Adaptor (1 pc.) [BB-HCM580A Only] Order No. PQLV202U Cord Length: About 3 m (9 feet 10 inches) Safety Wire (1 pc.) Order No. PQME10080Z Used to secure the camera when mounting it. AC Cord (1 pc.) [BB-HCM580A Only] Order No. PSJA1069Z Cord Length: About 1.8 m (5 feet 11 inches) Important Information (1 pc.) Installation Guide (this document) (1 pc.) Setup Guide (1 pc.) 2. You will need the following additional items to install and configure the camera. Audio/Video Cord (1 pc.) [BB-HCM581A Only] Order No. PSJA1103Y Setup CD-ROM (1 pc.) Order No. PQQX15704XCD Contains the Setup Program needed to configure the camera, as well as the camera's documentation.* *See the included Important Information for a description of each document. - a PC (see the system requirements in the Important Information document) - a router - a LAN cable (CAT-5 straight cable) Option for BB-HCM581A You can also connect the camera using the optional Panasonic BB-HCA3A AC Adaptor. The BB-HCA3A includes the following items. AC Adaptor (1 pc.) Cord Length: About 3 m (9 feet 10 inches) AC Cord (1 pc.) Cord Length: About 1.8 m (5 feet 11 inches) © 2007 Panasonic Communications Co., Ltd. All Rights Reserved. PQQX15933YA KK0207CM1107 1

  • 1
  • 2
  • 3
  • 4

1
Installation Guide
Network Camera
This manual is written for both the BB-HCM580A (AC Adaptor Type) and the BB-HCM581A (PoE Ready). Available features and operations vary slightly
depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.
Please read the included Important Information before proceeding.
Complete Operating Instructions and all other documentation can be found on the included CD-ROM.
Model No.
BB-HCM580A
(AC Adaptor Type)
BB-HCM581A
(PoE Ready)
Indoor Use Only
Installation Procedure Overview
The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.
Preparation
1.
Confirm the following items are included in the camera’s packaging.
Additional pieces can be ordered by calling 1-800-332-5368.
2.
You will need the following additional items to install and configure the camera.
Option for BB-HCM581A
You can also connect the camera using the optional Panasonic BB-HCA3A AC Adaptor. The BB-HCA3A includes the following items.
Preparation
Confirm that you have all the
items required for
installation.
Camera Diagram
Make sure you know the
names of the camera’s
physical features.
Connections
Connecting the camera to
your network and to the power
outlet.
Setup
Setting up the camera (described in the included
Setup Guide). This involves configuring the camera
so that it can be accessed from a PC.
Mounting
Mounting or placing the
camera.
Main Unit (1 pc.)
Washer S (1 pc.)
Order No. XWG26D12VW
Used when securing the safety
wire to the camera.
Washer L (1 pc.)
Order No. XWG4F16VW
Used when securing the safety
wire to the ceiling.
Screw A (2 pcs.)
Order No. XYN3+J6FJ
Used to secure ceiling plate A to
ceiling plate B.
Screw B (5 pcs.)
Order No. XTB4+20AFJ
Used to secure ceiling plate B (4
pcs.) and the safety wire (1 pc.) to
the ceiling.
Screw C (1 pc.)
Order No. PQHV2610PJ65
Used for connecting the safety
wire to the camera.
Ceiling Mounting Cover (1 pc.)
Order No. PSKL1023Y2
Used when mounting the camera
on a ceiling.
Ceiling Plate A (1 pc.)
Order No. PQZMHCM581A
Used to secure the camera to
ceiling plate B.
Ceiling Plate B (1 pc.)
Order No. PQMD10110Z
Used to secure the camera to the
ceiling.
AC Adaptor (1 pc.)
[BB-HCM580A Only]
Order No. PQLV202U
Cord Length: About 3 m
(9 feet 10 inches)
AC Cord (1 pc.)
[BB-HCM580A Only]
Order No. PSJA1069Z
Cord Length: About 1.8 m
(5 feet 11 inches)
Audio/Video Cord (1 pc.)
[BB-HCM581A Only]
Order No. PSJA1103Y
Safety Wire (1 pc.)
Order No. PQME10080Z
Used to secure the camera when
mounting it.
Important Information (1 pc.)
Installation Guide
(this document) (1 pc.)
Setup Guide (1 pc.)
Setup CD-ROM (1 pc.)
Order No. PQQX15704XCD
Contains the Setup Program needed to
configure the camera, as well as the
camera’s documentation.*
*See the included Important Information
for a description of each document.
a PC (see the system requirements in the Important Information document)
a LAN cable (CAT-5 straight cable)
a router
AC Adaptor (1 pc.)
Cord Length: About 3 m (9 feet 10 inches)
AC Cord (1 pc.)
Cord Length: About 1.8 m (5 feet 11 inches)
© 2007 Panasonic Communications Co., Ltd. All Rights Reserved.
PQQX15933YA
KK0207CM1107
Please read this document before using the product, and save this document for future
reference.
Panasonic Network Camera Website: http://www.panasonic.com/netcam
for customers in the USA and Puerto Rico
• This document (Installation Guide) explains how to physically connect the
camera to the power supply and network, as well how to mount or place the
camera for regular use.
• The
Setup Guide
describes how to set up the camera so that it can be
accessed using a PC.
• Refer to the
Operating Instructions
on the
CD-ROM
for details regarding
the camera’s features.
• Refer to the
Troubleshooting Guide
on the
CD-ROM
if you have any
problems configuring or using the camera.
Abbreviations
• UPnP is the abbreviation for “Universal Plug and Play”.
• The Network Camera is referred to as “the camera” in this document.
• The Setup CD-ROM is referred to as “the CD-ROM” in this document.