Panasonic BL-C10A Network Camera - Page 78
Resetting the Camera to Factory Default - password reset
UPC - 037988809738
View all Panasonic BL-C10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Operating Instructions 3.1.6 Resetting the Camera to Factory Default All camera settings are reset to factory default directly after the Execute button is clicked. 1. Click [Reset to Factory Default] on the Maintenance page. 2. Click [Execute]. • The indicator blinks orange, and then turns off for 10 seconds. • All camera settings (user name, password, IP address, subnet mask etc.) are reset to factory default. • If the camera is reset to factory default, the network connection mode changes to [Automatic Setup]. Reconfigure the camera seeing the Getting Started. Notes • The internal clock will not be reset, but the time format will return to AM/ PM mode (see page 35). Set it again. • See page 82-page 87 for default settings. • Pressing the FACTORY DEFAULT RESET button resets the camera to the factory default (see page 81). • All buffered images are deleted when resetting the camera to factory default. • The reset operation takes about 1 minute. • Do not turn off the camera during the reset operation. 78