Panasonic BL-PA300KTA Hd-plc Ethernet Adaptor - Multi Language - Page 16

Connecting adaptors to network devices, Installation

Get Panasonic BL-PA300KTA - High Definition Power Line Communication Ethernet Adaptor Twin PDF manuals and user guides
UPC - 037988845552
View all Panasonic BL-PA300KTA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Installation Connecting adaptors to network devices Once you have placed the adaptors where you plan to use them and are satisfied with the network speed test results for your terminals (see page 17), follow the procedure below to connect your adaptors to your network devices (broadband router, hub, computer, network printer, network camera, etc.). This will integrate your HD-PLC network with your home network. 1. Confirm that each adaptor is plugged in correctly to the wall outlet. • Do not plug adaptors in upside-down (i.e., with the LAN jack facing up). 2. Connect a LAN cable to each adaptor's LAN jack. • The LAN indicator of each adaptor turns green. • If an adaptor's LAN indicator does not turn green, see page 23. 3. Connect the other end of each LAN cable to a network device. • Up to 16 adaptors can be connected to the same network. If a hub is used, up to 8 devices can be connected to each adaptor. • Avoid connecting more than one adaptor to the same hub or router. • Refer to the illustration on page 11 for an example of an integrated HD-PLC network. You are now ready to use your computers, network printers, network cameras, etc. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
16
Installation
Connecting adaptors to network devices
Once you have placed the adaptors where you plan to use them and are
satisfied with the network speed test results for your terminals (see
page 17), follow the procedure below to connect your adaptors to your
network devices (broadband router, hub, computer, network printer, network
camera, etc.). This will integrate your
HD-PLC
network with your home
network.
1.
Confirm that each adaptor is plugged in correctly to the wall outlet.
•
Do not plug adaptors in upside-down (i.e., with the LAN jack
facing up).
2.
Connect a LAN cable to each adaptor’s
LAN
jack.
•
The
LAN
indicator of each adaptor turns green.
•
If an adaptor’s
LAN
indicator does not turn green, see page 23.
3.
Connect the other end of each LAN cable to a network device.
•
Up to 16 adaptors can be connected to the same network. If a
hub is used, up to 8 devices can be connected to each adaptor.
•
Avoid connecting more than one adaptor to the same hub or
router.
•
Refer to the illustration on page 11 for an example of an
integrated
HD-PLC
network.
You are now ready to use your computers, network printers, network
cameras, etc.