Panasonic BT-L2150PJ Brochure - Page 7

Features and Functions of the 3D/LH Series 3D/LH Series Still Frame Display A frame of video can easily be frozen and displayed as a still image on the left side of the screen. This function can be used to match a live camera with a frame of video shot at an earlier time or with a different Still Video Monitor FULL mode (4:3) camera. There are two display modes: FULL for displaying and comparing the entire image on the screen, and PART for displaying and comparing only the center part of the images. (Full-only on BT-3DL2550/LH2550) 2-Input Split-Screen Function The BT-3DL2500/LH2550 simultaneously displays two images side-by-side from two video inputs. This is especially useful for combining CGs and actual images. Because a single monitor can temporarily serve as two monitors, it helps to save space. It is also possible to set the size, color space, and gamma and RGB gains individually for each input. *It may not be possible to display both images simultaneously with certain input signal combinations. 2-Input Split-Screen Function (Left: SDI Input, Right: DVI Input) Audio Level Meter Overlay The BT-LH910G is equipped with a color audio level meter. This meter displays the level of embedded audio (3G SDI, SDI, HDMI*) input. Reference point setting, peak hold and overrange display are also possible. In other models, the skeleton bar meter displays the audio level of SDI embedded audio input on the screen. The display mode can be selected from 2-channel, 4-channel, 8-channel or OFF. * 2-channel display for HDMI input. BT-LH910G Color Audio Level Meter 8ch Audio Level Meter HV Delay Display and Mono Mode The HV Delay function that displays the video blanking period, and the Mono mode that switches the display to black-and-white, can be assigned to function keys for quick access. * In the BT-3DL2550, this function is supported only in 2D mode. Time Code Display Function With HD-SDI input, this function displays the value of the VITC, LTC or UB time code. Closed Caption Function The BT-LH910G can display closed captions with an SDI or VIDEO input. It supports the Time Code Display EIA-708 HD-SDI closed captioning standard (EIA-608 SD-SDI closed captioning standard), and can display up to eight windows simultaneously. Other models can display closed captions (32 characters x 15 lines) when an NTSC video Closed Caption Display signal is input. The display mode can be selected from CC1, CC2, CC3 or CC4. * In the BT-3DL2550, this function is supported only in 2D mode. Calibration Function The BT-3DL2550/LH2550/ LH910G comes installed with software that allows it to be calibrated without using a PC, by simply connecting a manufacturer-designated display color analyzer and measurement probe to the monitor. *Konica Minolta CA-310 Display Color Analyzer with CA-PU32/PU35 or CA-PSU32/PSU35 Standard Measurement Probe. For more information about the Konica Minolta calibration system, please see the following website. . * Not equipped in the BT-LH1760/LH1710. Cine Gamma Compensation The cine-gamma (F-REC) compensation function enables compatibility as a monitor for a Varicam Camcorder. This function supports the production of movies, film-like HDTV programs, and TV commercials. The BT-LH910G is equipped with a black mode that also makes dark image areas in low-gradation scenes easier to see. It helps for producing movies as well as film-like HD programs and commercials. Function Keys Each of the function keys on the front panel can be assigned a function selected from various display and switchover functions* to enable one-touch display ON/OFF or mode change. These function buttons speed up operation and customize the functions to individual user needs. * Assignable functions vary depending on the model. In the BT-3DL2550, functions that can be used vary in 3D display and 2D display. Rugged Frame Structure The BT-LH1760/LH1710 feature an aluminum diecast frame (front section only), while the BT-LH910G has a magnesium diecast frame. These rugged structures provide the toughness required in professional field work. * Not provided in the BT-3DL2550/LH2550. Aluminum diecast frame (BT-LH1760/LH1710) External Remote Compatibility The standard RS-232C (9-pin) and GPI (9-pin) remote input terminals allow the monitor to be operated by an external device. Tally Lamps The front panel has red, green and amber tally lamps. The BT-LH910G also has a rear tally lamp for added convenience when being used as a viewfinder. Power Save Mode When no signal is received for 60 continuous seconds, the Power Save mode is activated to minimize power consumption. * Not provided in the BT-LH910G. Wall Mounting The optional wall mounting hardware (optional BT-WMA17G or BT-WMA26G) allows wall mounting of these thin, lightweight LCD monitors. * Not supported by the BT-LH910G. Protective Panel The optional protective panel (BT-PRP17G) protects the BT-LH1760/LH1710 LCD panel from environmental elements such as sand and dust during outdoor use. 6