Panasonic BT-L2150PJ Operating Instructions - Page 23

Main Menu (continued) AUDIO Sets speaker and headphones output. Underlined values indicate factory defaults. Sub menu Setting Description INPUT SELECT AUTO ANALOG Selects speaker and headphones output. When an SDI input line is selected with the INPUT SELECT button on the front panel: embedded audio (SDI IN terminal) When an HDMI input line is selected with the INPUT SELECT button on the front panel: embedded audio (HDMI terminal) When input lines other than SDI or HDMI are selected with the INPUT SELECT button on the front panel: analog (AUDIO IN terminal) Analog (AUDIO IN terminal) EMBEDDED SELECT*1 CH7 - CH8 CH5 - CH6 CH3 - CH4 CH1 - CH2 Selects embedded audio CH to output to the speakers or headphones. Outputs CH7 to the left channel and CH8 to the right channel Outputs CH5 to the left channel and CH6 to the right channel Outputs CH3 to the left channel and CH4 to the right channel Outputs CH1 to the left channel and CH2 to the right channel *1 When an HDMI signal is selected, CH1 is output to the left channel and CH2 to the right channel. DISPLAY SETUP Underlined values indicate factory defaults. Sub menu CLOSED CAPTION*2*3 CAPTION CHANNEL*2 Setting OFF ON CC4 CC3 CC2 CC1 Description Enables closed captions display. Selects the closed caption display channel. *2 Available during VIDEO (NTSC) input. *3 When MARKER is set to ON, this setting automatically turns to OFF. CONTROL Sub menu Setting Description Underlined values indicate factory defaults. KEY LOCK*4 OFF ON Selects operation (also locks control). Enables front panel operation Disables the front panel operations other than POWER switch, MENU buttons (MENU, , , ENTER), or VOLUME button *4 Only KEY LOCK is enabled when the key lock is engaged. The picture adjusting buttons are disabled when the lock is engaged. The KEY LOCK lamp on the front panel is on when the lock is engaged. 23