Panasonic BT-L2150PJ Operating Instructions - Page 26

Detaching and Attaching the Protective Panel The LCD panel is covered by a protective panel to protect it from damage during transportation. Remove the protective panel before use. Groove Protective panel screw • The illustration shows an example for BT-L2150P/ 2150E. indicates screws found only on BT-L2150P/ 2150E (not present on BT-L1500P/1500E) Detaching the panel 1. Unscrew the protective panel screws (10 screws for BT-L2150P/2150E, 8 for BT-L1500P/1500E) using a Phillips screwdriver while supporting the protective panel with your hand. 2. Detach the protective panel. • After detaching, please store the protective panel and the protective panel screws. Attaching the panel Verify the top and bottom of the protective panel before attaching. 1. Align the screw holes on the protective panel with those on the unit. • Fit the protective panel into the groove on the unit. 2. Using a Phillips screwdriver, screw the protective panel screws (10 screws for BTL2150P/2150E, 8 for BT-L1500P/1500E) to screw the protective panel to the unit. • The protective panel may crack if it is screwed too tight. (Screwing torque: Tighten to about 30 N cm or less) 26