Panasonic BT-LH1710 User Manual - Page 42
Specifications - warranty
UPC - 092281890852
View all Panasonic BT-LH1710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Specifications ■ General Input power Power supply: AC: 100 V - 240 V, 50/60 Hz DC: 12 V (11 V - 17 V) Power consumption: 0.6 A - 0.3 A 4.0 A is the safety information. Dimensions: • Including stand 430 (W) mm × 323.5 (H) mm × 198 (D) mm [16 15/16 (W) inches × 12 3/4 (H) inches × 7 13/16 (D) inches] • Main body only, not including stand 430 (W) mm × 309 (H) mm × 81.1 (D) mm [16 15/16 (W) inches × 12 3/16 (H) inches × 3 3/16 (D) inches] Mass: • Including stand 7.1 kg (15.7 lb) • Main body only, not including stand 6.2 kg (13.7 lb) Operating temperature: +5 °C to +35 °C (+41 °F to +95 °F) Operating humidity: 20 % to 80 % (no condensation) Storage temperature: -20 °C to +60 °C (-4 °F to +140 °F) ■ Panel Size: 17.0 type Aspect ratio: 15:9 Number of pixels: 1280 × 768 (WXGA) Display colors: Approx. 16,770,000 colors View angle: 176° up/down, 176° right/left ■ Input/output Connectors Image signal input: VIDEO: 1 line, BNC × 2 (1 connector with through-out configuration) Analog component: 1 line for YPBPR/RGBS, BNC × 8 (4 connectors with through-out configuration) However, when input is RGB-COMP. this becomes BNC × 5 (R, G, B, HD, and VD). (Through-out is not available) SDI: Compliant with SMPTE 274M, 296M, 259M-C and ITU-R BT.656-4 2 lines, BNC × 3 (1 connector with switched-out configuration) DVI-D (HDCP compatible): TMDS single link 1 line, DVI-D × 1 Vertical frequency: 50.0 - 60.0 Hz Horizontal frequency: 31.5 - 67.5 kHz Dot clock: 25 - 165 MHz Audio input: Pin jack × 2 (stereo) Headphone output: Stereo minijack M3 × 1 GPI: D-SUB, 9 pins × 1 RS-232C: D-SUB, 9 pins × 1 DC input: XLR, 4 pins × 1 42 ■ Signal level VIDEO EXT SYNC signal level: 0.3 Vp-p to 4.0 Vp-p HD/VD signal level: TTL level AUDIO AUDIO input level: 0.5 Vrms Speaker output: 0.5 W + 0.5 W Headphone output: 32 Ω, level adjustable ■ SDI embedded audio HD-SDI: SMPTE299M compatible Sampling rate: 48 kHz, synchronous/asynchronous 8 ch SD-SDI: SMPTE272M compatible Sampling rate: 48 kHz, synchronous 4 ch ■ Standard accessories Operationg instructions × 1 Warranty (Card) × 1 Power cord × 1 Power cord hook × 1 Screw × 1 Operationg instructions × 1 AC mains lead × 2 AC mains lead hook × 1 Screw × 1 ■ Optional units Rack Mount Adaptor BT-MA1710G Wall Mount Adaptor BT-WMA17G Protection Panel BT-PRP17G Inrush current, measured according to European standard EN55103-1: 5.62A