Panasonic BTLS1400P BTLS1400 User Guide - Page 9

How to use the on-screen menus ¥ VIDEO CONFIG menu The menu items shown below appear when the VIDEO CONFIG menu is selected on the main menu. [VIDEO CONFIG] ASPECT COMPONENT LEVEL 16:9 SMPTE ASPECT An aspect ratio of 4:3 or 16:9 can be set. The underscanning function cannot be used when 16:9 has been selected. COMPONENT LEVEL The component input level is selected here. This menu item appears only when the component signal has been selected as the input signal. ≥ SMPTE Select this when signals from a DVD or M II VTR are supplied. ≥ B75 Select this when signals with a 7.5% setup level are supplied from a Betacam VTR. ¥ SYSTEM CONFIG menu The menu items shown below appear when the SYSTEM CONFIG menu is selected on the main menu. [SYSTEM CONFIG] BACKLIGHT 60 STATUS DISPLAY CONTINUE [INPUT SELECT] LINE B ON CMPNT ON SDI ON REMOTE OFF INPUT SELECT LINE B By setting this item to OFF, LINE B can be skipped. CMPNT By setting this item to OFF, CMPNT can be skipped. SDI By setting this item to OFF, SDI can be skipped. This item is valid only when the optional SDI input unit (BTYA210G) is installed. BACKLIGHT The backlight brightness is adjusted to a value from 0 to 60 here. 60 is the factory setting. REMOTE External control is set to ON or OFF here. STATUS DISPLAY The information displays during input switching and input signal system display are set here. ≥ CONTINUE The information remains displayed. This is the factory setting. ≥ 3 SEC OFF The information is displayed for 3 seconds, after which it is cleared from the display. ≥ OFF No information is displayed. 9