Panasonic CF-19FHGAXAM Service Manual - Page 32
Assembly of LCD Back Damper Application Model : Digitizer Model, Assembly of Inverter PCB
View all Panasonic CF-19FHGAXAM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
■ Assembly of LCD Back Damper (Application Model : Digitizer Model) PCB 33 35mm Attch to the side surface of the Frame. Match to the end of the Frame within 0 to 0.5 mm at the far side. Screw the Board together 0 0.5mm LCD Back Dumper Remove the Release Paper on the back side and attach it. Lengthwise : Match to the LCD Frame. Crosswise : Match to the middle line. Digitizer PCB Ass'y Ensure the connector is connected securely. 10 2mm ■ Assembly of Inverter PCB 0 0.5mm 0 0.5mm 0 0.5mm 0 0.5mm 0 0.5mm 0 0.5mm Important Parts for Safety Inverter Inverter Case Bottom Do not press the piezoelectric transformer. Inverter MIL Cover Insert from the direction of hole and notch. Confirm the direction of the Inverter board when attaching. Insert it as the protrusion of the Inverter Case Upper come to the gap side of INverter MIl Cover. Remove the Release Paper, and then attach the Inverter. 2 4mm MIL Sheet Wrap the Sheet to overlap it on the side. Set the Inverter Case Bottom to make it outside.