Panasonic CF-73N3LTSKM Notebook Computer - Page 28

Dealing with Problems (Summary) Touch Pad / Touchscreen (only for models with touchscreen) The cursor cannot be controlled properly Unable to input using the touch pad Unable to point correctly with the stylus included with the computer Unable to input by touching the display If you are using an external mouse, ensure that the external mouse has been connected correctly. Restart the computer by using the keyboard. (Press , U , and select [Restart] with R ) If the computer does not respond to keyboard commands, read "No response" ( page 29). Has the Setup Utility been used to set [Touch Pad] to [Enable]? When external mouse drivers are installed (e.g., Intellimouse), the touch pad may not be used. Has the touch pad driver been properly installed? As a result of the physical characteristics of the touchscreen, sometimes the position of the stylus does not match the position of the cursor on the screen. This is not a malfunction. Perform [Calibration]. ( page 13) Has the Setup Utility been used to set [Touchscreen] to [Enable]? When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to be used. Reinstall the touchscreen driver. Has the touchscreen driver been properly installed? Reference Manual The Reference Manual is not displayed Is Acrobat Reader installed? If Acrobat Reader is not installed, run [c:\util\reader\acroreader51_enu_full.exe] in [start] [Run] to reinstall the program. When installing the program, do not change the installation destination folder. If the destination folder is changed, the Reference Manual cannot be opened from the [start] menu. Reinstalling B's Recorder/B's CLiP When reinstalling, the input of a serial number has been asked Input the following serial number B's Recorder: B's CLiP: SD Memory Card Cannot log on with the SD memory card Windows logon user name and password are not set in the SD memory card correctly. Enter the Windows user name and password without using the SD memory card. After logging on, set the same user name and the password on the SD memory card and Windows, using one of the following operations. • Change the setting of the SD memory card side by [SD Card Setup]. • Change the setting of the Windows side by [Control Panel]. Fast User Switching Function Some applications do not work properly When switching to a different user with the Fast User Switching function, the following problems may occur. • Some applications may not work properly. • Key combinations with the Fn key may not work. • It may not be possible to set the settings of the display. • Wireless LAN may not work. • A serial mouse may not work. • The B's CLiP icon will no longer be shown on the taskbar and B's CLip cannot be used. In this case, log off all users without using Fast User Switching function, and try the operation once more. If the problem persists, restart the computer. 28 Troubleshooting