Panasonic CF18NDHZBVM CF18KDHZBVM User Guide - Page 18
Operation
View all Panasonic CF18NDHZBVM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Starting Up/Shutting Down 3 Log on to Windows. After confirming that the hard disk drive indicator has turned off, select the user and input the password, then select . Until the correct password is entered, the computer will not operate. 4 Select your application. You are able to start working on your computer. NOTE The power saving function is factory set, so if there is no input from a key, the touch pad, the tablet button, the digitizer or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad, the digitizer or an external mouse (when one is connected) is used or a key or the tablet button is pressed. The power to the LCD may be turned off even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not press Space or Enter to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like Ctrl . In addition, when the computer is left alone, it automatically enters the standby or hibernation mode. The computer will resume by sliding the power switch. ( "Standby/Hibernation Functions") If [Enter Password] is displayed, Enter your password*1 and press Enter . ( "Security Measures") Enter Password [ The correct password ] Will Start Three incorrect attempts or No password for about a minute Will Not Start (Power off) *1 Supervisor Password or User Password set in the Setup Utility (not the Windows password). Operation 18