Panasonic CF18NDHZBVM CF18KDHZBVM User Guide - Page 35
Reinstalling Software
View all Panasonic CF18NDHZBVM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Reinstalling Software When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data on your hard disk to another media or to an external hard disk before running the reinstallation procedure. The reinstallation procedure will return the computer to its original condition. Even if a hard disk backup area has been created, this backup area will be erased, and all the backed up data will be lost. (This is not the case when Windows is reinstalled in the first partition.) • If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure. Before Reinstallation Preparing Product Recovery CD-ROM (included) Panasonic USB CD/DVD drive (optional: CF-VDRRT1M, CF-VDRRT2W or CF-VDRRT3W) Important Before the reinstallation procedure, remove all peripherals (except for the CD/DVD drive). Be sure the AC adaptor is connected until the reinstallation procedure is completed. Reinstalling 1 Turn off the computer and connect the CD/DVD drive to the USB port. 2 Turn the computer on, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Password. 3 Write down all of the contents of the Setup Utility and then press F9 . At the confirmation message, select [Yes] and press Enter . 4 Select [Boot] menu, then select [USB CDD] and press F6 until [USB CDD] is at the top of the [Boot] menu. 5 Place disc number one of the recovery CDs into the CD/ DVD drive. 6 Press F10 . At the confirmation message, select [Yes] and press Enter . The computer will restart, and this screen should appear. Select a number 1. [ Recovery ] Reinstall Windows. 2. [ Erase HDD ] Erase the whole data on HDD for security. 3. [ Backup ] Enable the Backup function. 0--.-[--C--a-n-c-e-l------]--C-a-n--c-e-l When the message [The Backup function has been enabled. If [Recovery] or [Erase HDD] is executed, the Backup function will be disabled, and your Backup data will be lost.] appears, press Y . 7 Press 1 to execute [1.[Recovery]]. (You can cancel this operation by pressing 0 .) The License Agreement screen should appear. 8 Press 1 to select [1. Yes, I agree to the provisions above and wish to continue!]. This screen should appear. Select a number Reinstalling : Windows(R) XP Tablet PC Edition 1. Reinstall Windows to the whole HDD to factory default. 2. Make two partitions, for the operating system and data. And reinstall Windows to the operating system partition. (All existing partitions on HDD will be lost.) 3. Reinstall Windows to the first partition. 0--. -C--a-n-c-e-l 9 Make a selection from the menu. NOTE When [2] is selected, the hard disk backup function cannot be enabled because the hard disk has been divided into partitions. When selecting [2], enter the basic partition size for the operating system installation and press Enter . (The data partition size is the remainder after subtracting the basic partition size.) To select [3], the initial partition size must be 8 GB*1 or more of the hard disk size. Reinstallation cannot be performed with a small partition size. *1 CF-18N******: 14 GB If you select [1] or [2], the message [The Backup function has been enabled. If [Recovery] is executed, the Backup function will be disabled, and your Backup data will be lost.] appears. In this case, press Y . If the message [Computer must be rebooted in order to execute [Recovery].] appears, press R . 35 Troubleshooting