Panasonic CF29NTQGZBM CF29L3LGZBM User Guide - Page 28
Dealing with Problems Summary
View all Panasonic CF29NTQGZBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Dealing with Problems (Summary) Starting Up (continued) When the previous item is not the cause Press F9 in the Setup Utility ( "Setup Utility"). This will restore the Setup Utility's settings to their default values (except the password settings). Try removing all peripheral devices. Check a disk error using the following procedure. 1 Select [start] - [My Computer], right-click [Local Disk(C:)], and then select [Proper- ties]. 2 Select [Tools] - [Check Now]. 3 Select [Start] after selecting required items in [Check disk options]. At startup, hold down F8 when [Panasonic] boot screen disappears*1, and release your finger when the Windows Advanced Options Menu is displayed. Start the computer in Safe Mode, and confirm the details of the error. *1 When [Password on boot] is set to [Enable], [Enter Password] appears after the [Panasonic] boot screen disappears. Hold down F8 soon after inputting the password and pressing Enter . Entering Password On the [Enter Password] screen, a beep sounds and the password cannot be entered Even after entering the password, [Type your password] is displayed again The computer may be in ten-key mode. If the NumLk indicator lights, press NumLk to disable the ten-key mode, and then input. The computer may be in ten-key mode. If the NumLk indicator lights, press NumLk to disable the ten-key mode, and then input. The computer may be in Caps Lock mode. If the Caps Lock indicator lights, press Caps Lock to disable the Caps Lock mode, and then input. Display No display after powering on When there is no display to an external display, • Check your cable connection to the external display. • Confirm your display is powered on. • Check the settings for your external display. The display destination may be set to the external display. Try changing the display destination by pressing Fn + F3 . If you want to switch the display destination repeatedly by pressing Fn + F3 , make sure that the display destination has switched completely each time before pressing Fn + F3 again. Press Fn + F2 and adjust the LCD brightness. Troubleshooting The power has not been turned off, but after a certain period of time, there is no display Has the computer been set to the power-saving mode? To resume operation of your computer from the condition the power of the display is off (for energy conservation purposes), press any key unrelated to the direct triggering of a selection, like Ctrl . To save power, your computer may have automatically entered the standby mode (power indicator blinks green) or hibernation mode (power indicator turns off). In such cases, slide the power switch. When the battery pack is used, the screen is darker than when the AC adaptor is connected Press Fn + F2 and adjust the LCD brightness. Note, however, that when the LCD brightness is increased, the battery running time will become shorter. The LCD brightness can be set to separate levels for when the AC adaptor is connected and when it is disconnected. The LCD brightness changes a number of times when the AC adaptor is disconnected Intel(R) Display Power Saving Technology ( "Computing on the Road") is active and automatically changes the LCD brightness. Image colors are not repro- We recommend removing the check mark from [Intel(R) Display Power Saving Technol- duced as expected when dis- ogy]. ( "Computing on the Road") playing photographs or other images 28