Panasonic CQ-5800U Auto Radio/cd Deck - Page 32

Electrical Connections Caution • This wiring information is for experienced technical individual, for safety reason, please your dealer wire this connection. • This product is designed to operate with a 12 V DC, negative ground battery system. • To prevent damage to the unit, be sure to follow the connection diagram below. • Do not insert the power connector into the unit until the wiring is completed. • Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle all cables and keep cable terminals free from touching any metal parts. • Remember, if your vehicle has a drive computer or a navigation computer, the data of its memory maybe erased when the bat- tery terminals are disconnected. ❐ Wiring Diagram External Remote Control Lead When using non-Panasonic external remote control, refer to the manufacture for their product before connecting. CD Receiver CQ-5800U 10 12 14 16 9 11 13 15 753 1 Antenna (Rear Side) 86 42 Power Connector The power connector does not come along with the unit. If need, please consult your dealer. Detail of power connector NO. FUNCTION NO. 1 BATTERY +12 V 9 2 GROUND 10 3 --- 11 4 --- 12 5 --- 13 6 POWER +12 V ACC 14 7 --- 15 8 --- 16 FUNCTION REAR SP R (-) REAR SP R (+) FRONT SP R (-) FRONT SP R (+) FRONT SP L (-) FRONT SP L (+) REAR SP L (-) REAR SP L (+) ACC (Red) Accessory Power(ACC) (+12 V DC, negative ground only) Ground Battery (Black) Ground Lead (Connect to a clean, bare metallic part of your vehicle) (Yellow) Battery Lead (Connect to vehicle battery) (Gray/Black) Illumination (Orange) Illumination Lead (Not used) (Violet/Black) (White/Black) (white) (Gray) (Green/Black) (Green) (Violet) Left Speaker (Front) Right Speaker (Front) Left Speaker (Rear) Right Speaker (Rear) 32 CQ-5800U