Panasonic CQ-5800U Auto Radio/cd Deck - Page 37

No sound from speakers, Poor reception or noise, Preset stations cannot be, stored.

Page 37 highlights

No sound from speaker(s) The speaker channels are reversed between right and left. BALANCE/FADER setting is not appropriate. a Readjust BALANCE/FADER. There is a break, a short circuit, poor contact or wrong wiring regarding the speaker wiring. a Check the speaker wiring. The speaker wiring is confused between right and left. a Perform the speaker wiring in accordance with the wiring diagram. The sound field is not clear in the stereo mode. Central sound does not settled. The plus and minus terminals at right and left channels of speakers are connected reversely. a Perform the speaker wiring in accordance with the wiring diagram. The power fails unintentionally. The safety device works. a Consult your dealer, or your nearest Panasonic Servicenter. Radio Poor reception or noise The number of auto preset stations is less than 6. Antenna installation or wiring of antenna cable is faulty. a Check whether the antenna mounting position and its wiring are correct. In addition, check to see whether the antenna ground is securely connected to the chassis. No power is supplied to the antenna amplifier (when using a film antenna, etc.). a Check the wiring of the antenna battery lead. The number of receivable stations is less than 6. a Move to an area where receivable stations number is maximum, and try pre- setting. Preset stations cannot be stored. The contact of the battery lead is poor, or the battery lead is not always powered. a Make sure that the battery lead is connected securely, and preset stations again. CQ-5800U 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

37
CQ-5800U
No sound from speaker(s)
BALANCE/FADER setting is not appropriate.
a
Readjust BALANCE/FADER.
There is a break, a short circuit, poor contact or wrong wiring regarding the speaker
wiring.
a
Check the speaker wiring.
The speaker channels are
reversed between right and
left.
The speaker wiring is confused between right and left.
a
Perform the speaker wiring in accordance with the wiring diagram.
The sound field is not clear in
the stereo mode. Central
sound does not settled.
The plus and minus terminals at right and left channels of speakers are connected
reversely.
a
Perform the speaker wiring in accordance with the wiring diagram.
The power fails
unintentionally.
The safety device works.
a
Consult your dealer, or your nearest Panasonic Servicenter.
Poor reception or noise
Antenna installation or wiring of antenna cable is faulty.
a
Check whether the antenna mounting position and its wiring are correct. In
addition, check to see whether the antenna ground is securely connected to
the chassis.
No power is supplied to the antenna amplifier (when using a film antenna, etc.).
a
Check the wiring of the antenna battery lead.
Radio
The number of auto preset
stations is less than 6.
The number of receivable stations is less than 6.
a
Move to an area where receivable stations number is maximum, and try pre-
setting.
Preset stations cannot be
stored.
The contact of the battery lead is poor, or the battery lead is not always powered.
a
Make sure that the battery lead is connected securely, and preset stations
again.