Panasonic CQ-C7105U Operating Instructions - Page 62

Sirius Satellite Radio Receiver (continued) Operation Flow 1 Press [SOURCE] to select the Sirius Satellite Radio mode. 2 Press [BAND] to select a band. Notes is displayed when there is no information. ¡ "UPDATING" is displayed when channel informa- tion is updated. 3 Select a channel. Channel selection []] (TUNE): Preceding channel [[] (TUNE): Next channel Note: When you select a locked channel, hold down [#] on the remote control for 2 sec. or more. PASSCODE entering display will appear. Preset channel selection [{] (P-SET: Preset): Lower preset channel [}] (P-SET: Preset): Higher preset channel Notes: ¡ Direct selection can be executed with [1] to [6] buttons on remote control. ¡ A preset station is selectable by turning [VOL] and pressing [PUSH SEL] while the preset list screen is present on the monitor. ¡ The volume is not adjustable while the preset list screen is present on the monitor. Up to 6 channels can be preset in SR1 to SR3 respectively. Preset channels can be simply called up by pressing [}] (P-SET) or [{] (P-SET). Note: Direct selection can be executed with [1] to [6] buttons on remote control. 1 Tune into a channel. 2 Hold down [}] or [{] for 2 sec. or more. 3 Turn [VOL] to select a preset number. 4 Hold down [PUSH SEL] for 2 sec. or more, and the channel is written on the selected preset number. You can toggle the category on and off every time you hold down [BAND] for 2 sec. or more. If the category is set to on, the unit operates as follows for each button: Preset number/channel number blinks once. Notes: ¡ In step 2, a channel can be registered by holding down the numeric button [1] to [6] for 2 sec. or more. ¡ To stop presetting channels, press [DISP] (DISPLAY). ¡ The operation above allows users to replace the cur- rent channel with the channel preset in the selected number while selecting a preset channel. Channel selection []] (TUNE): Preceding channel in current category [[] (TUNE): Next channel in current category Category selection [{] (P-SET: Preset): Preceding category [}] (P-SET: Preset): Next category lights when activated. Channel Preset (P-SET: PRESET) Selection by Category 18 CQ-C7205U/C7105U