Panasonic CQ-C7105U Operating Instructions - Page 64

Hands-Free Phone System Be sure to read "Safety Information" in the Operating Instructions for the Hands-Free Phone System before use. Preparation Connecting Hands-Free Phone System Connect the Hands-Free Phone System (CY-BT100U) and establish the pairing. Refer to the instruction manual for the Hands-Free Phone System for further information. Note: This unit is designed only for receiving calls. It cannot send calls. Switch Unit Status indicator (Blue LED) lights: Call waiting/Talking stays out: Not connected blinks rapidly: Receiving a call blinks slowly: Pairing/Reconnecting [Hang-on]/Blue LED [Hang-up]/Red LED Operation Flow 1 Press [Hang-on] on the Hands-Free Phone System and pick up the phone. The phone is in the incoming state. 2 Adjust the volume if necessary. 3 Press [Hang-up] on the Hands-Free Phone System and hung up the phone. Adjust the ring volume The ring volume is adjustable from this unit. (Setting range: OFF/LOW/MID/HIGH, Default: MID) [}]: up [{]: down Notes: ¡ The ring volume is adjustable only when receiving calls. ¡ The ring volume is adjustable only when the phone ring comes out of the main unit. ¡ The ring volume is also adjustable by turning [VOL]. Reject calls Pressing [Hang-up] allows users to reject a call when the call is coming in. Bluetooth disconnection/reconnection Pressing [Hang-up] allows users to temporarily disconnect when the phone is in the waiting state. Pressing [Hang-up] allows users to reconnect when the Bluetooth unit is temporarily disconnected. 20 CQ-C7205U/C7105U