Panasonic CQ4330U CQ4330U User Guide - Page 13

APM DISP PWR BAND MODE VOL PUSH SEL/SAT BASS/TREB BAL/FADER DISC 1 MTL 2 NR 3 TPS CQ-4330U CD SCAN 4 REP RPT 5 SKP LOUD MUTE RDM SCAN 6 ILL CLK ALM TUNE SEEK Metal Tape Mode Press [1] (MTL) when playing metal or chromium dioxide (CrO2) tapes. Press [1] (MTL) again to cancel. Blank Skip Press [5] (SKP) to skip unrecorded portions longer than 15 seconds on the tape. Press [5] (SKP) again to cancel. Note: Playing normal tapes in metal tape mode causes high frequency imbalance, which affects tone quality. Dolby B Noise Reduction Press [2] (NR) to set the Dolby B NR mode. Press [2] (NR) again to cancel. Note: Set the Dolby B NR mode when playing back a tape recorded with Dolby B Noise Reduction. Tape Program Search (TPS) Operation q Press [3] (TPS) to activate the tape program search mode. w To select a desired program, press [2 TRACK] or [1 TRACK] corresponding times to go forward (up to 9) or backward (up to 8). (Rewind:) 8 0 c (Fast forward:) 1 9 c e Press [3] (TPS) again to cancel. Note: When repeat is on, the blank skip does not work because the repeat has priority over the blank skip. Repeat Play Press [4] (REP) to repeat the current program. Press [4] (REP) again to cancel. Note: The TPS and SKP mode may not work correctly in the following cases. This, however, does not mean that the unit is defective. • There is an interval less than 3 (15 in SKP mode) seconds or having a high level of noise or hum between programs. • There is particularly low-level passage during the program. 13 CQ-4330U