Panasonic CQ5100U CQ5100U User Guide - Page 28

Specifications ❐ General Power Supply: Current consumption: Maximum Power Output: Tone adjustment range: Bass: Treble: Power Output: Suitable Speaker Impedance: Dimensions (W H D): Weight: 12 V DC (11 V-16 V) test Voltage 14.4 V, Negative @ ground Less than 2.5 A (CD mode, 0.5 W 4-speaker) 37 W × 4 channels at 400 Hz, Volume Control maximum ± 12 dB at 100 Hz ± 12 dB at 10 kHz 18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD 4-8 Ω 178(W) 50(H) 150(D) mm {7" 1-15/16" 5-7/8"} 1.3 kg {2.8 lbs.} ❐ Front AUX Input Input impedance: Allowable external input: Connector: 10 kΩ 2.0 V 3.5 mm ø stereo mini pin ❐ FM Stereo Radio Frequency Range: Useable Sensitivity: 50 dB Quieting Sensitivity: Frequency Response: Alternate Channel Selectivity: Stereo Separation: Signal/Noise Ratio: 87.9-107.9 MHz 12 dBf. (1.1 µV/ 75 Ω, S/N 30 dB) 17 dBf. (1.8 µV/ 75 Ω) 30-15 000 Hz ±3 dB 75 dB 35 dB at 1 kHz 70 dB (Mono) ❐ AM Radio Frequency range: Usable sensitivity: 530 kHz - 1 710 kHz 28 dB/µV (25 µV, S/N 20 dB) ❐ Weather Band Radio Frequency range: Usable sensitivity: Signal/Noise Ratio (40 dB/µV): 162.40 - 162.55 MHz 3 dB/µV (S/N 20 dB) 50 dB ❐ CD Player Sampling Frequency: DA Converter: Error Correction System: Pick-Up Type: Light Source: Wavalength: Frequency Response: Signal to Noise Ratio: Total Harmonic Distortion: Wow and Flutter: Channel Separation: 32 times oversampling MASH•1 bit/4 DAC System Panasonic Super Decoding Algorithm 1-beam Semiconductor laser 790 nm 20 - 20,000 Hz (±1 dB) 85 dB 0.01 % (1 kHz) Below measurable limits 75 dB Above specifications comply with EIA standards. Power Output: 18 W RMS x 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 85 dBA (reference: 1 W into 4 Ω) Note: Specifications and the design are subject to modification without notice due to improvements in technology. 28 CQ-5100U