Panasonic CQ5300U CQ5300U User Guide - Page 18

Temperature Reading (Only for CQ-5500U) Press and hold To read the temperatare outside the vehicle, press and hold the knob [SEL] for more than 2 seconds. The current temperature in Fahrenheit appears on the display. BASS/TREB/BAL/FADER Press and hold the knob [SEL] for more than 2 seconds again to cancel the temperature reading mode. Press and release Press and release the knob [SEL] to shift the temperature display to the current operating mode. BASS/TREB/BAL/FADER Notes: The temperature Sensor Lead must be connected. (option) The temperature reading range is -22°F~140°F. The display will 22°F when the temperature is lower than -22°F or 140°F when higher than 140°F. If you change the temparature reading mode to the other mode (EX. Tape mode CD changer mode) the display will show that mode for 5 seconds and then resume the temperature reading. In Case of Malfunction BASS/TREB/BAL/FADER Reset Switch If the unit does not respond when the function buttons are pressed, press the reset switch with a small pointed object, such as a pencil point. This will restore the unit to its default settings. All previously stolred memory settings will be erased. Repeat the necessary steps in the previous pages to reprogram the clock and memory settings. If pressing the reset switch does not restore normal operation, please return the radio to the nearest authorikzed service center for service. 17