Panasonic CQVW100U In-dash Dvd Monitor - Page 47

English Specifications General ¡Power supply : 12 V DC (11 V - 16 V), test voltage 14.4 V, negative ground ¡Current consumption : Less than 10 A (during disc playback) ¡Maximum power output : 50 W x 4 ch ¡Power output : 20 W x 4 ch ¡Compatible speaker impedance : 4Ω ¡Video input signal : Composite video signal, 1.0 Vp-p (75 Ω) ¡Audio input sensitivity : 2 Vrms ¡Video output signal : Composite video signal, 1.0 Vp-p (75 Ω) ¡Pre-Amp output voltage : 2 Vrms ¡Pre-Amp output impedance: Less than 600 Ω ¡Dimensions (W x H x D) : 178 x 100 x 160 mm {7" x 3 /15 16 " x 6 5/16"} ¡Weight : 2.3 kg {5 lbs. 1 oz.} FM stereo radio ¡Frequency range ¡Usable sensitivity ¡Stereo separation ¡S/N ratio : 87.9 MHz - 107.9 MHz : 12.2 dBf : 30 dB (1 kHz) : 62 dB AM radio ¡Frequency range ¡Usable sensitivity ¡Image rejection ratio : 530 kHz - 1 710 kHz : 28 dB/µV : 50 dB Audio section ¡Output voltage/ Impedance ¡Frequency characteristics ¡Dynamic range ¡S/N ratio Monitor ¡Liquid crystal panel ¡Screen dimensions (W x H x D) ¡Number of pixels ¡Valid pixel ratio ¡Display method ¡Drive method : 2 Vrms/600 Ω : 20 Hz - 20 kHz (±1 dB) 46 : 96 dB (during CD playback) : 95 dB (during CD playback) : 7" wide : 154 x 87 x 177 mm {6 /1 16 " x 3 /7 16 " x 6 15/16"} : 336 960 pixels (234 vertical x 480 horizontal x 3) : Over 99.99% : Transparent color filter for- mat : TFT (Thin Film Transistor) active matrix format Above Specifications comply with EIA standards. Power Output: 20 W RMS x 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Note: ¡Specifications and the design are subject to modification without notice due to improvements in technology. ¡Some figures and illustrations on this manual may be different from your product. CQ-VW100U 47