Panasonic CS-E9RKUAW E12RKUA Service Manual - Page 71

Press Auto OFF/ON button to toggle remote control receiving sound. - Short "beep": Turn OFF remote control receiving sound. - Long "beep": Turn ON remote control receiving sound. After Auto OFF/ON button is pressed, the 20 seconds counter for Remote Control Receiving Sound OFF/ON Mode is restarted. 17.2 Cooling Only Operation (Single connection Only, Multi connection please refer to Multi outdoor manual) 17.2.1 How to activate and deactivate Cooling Only Operation AUTO SW is pressed 5s 8s 11s 16s 21s 26s 36s Emergency Operation Forced Cooling Operation Forced Heating Operation Cool Only Mode Enable/ Disable Remote Control Number Switch Mode Remote Control Receiving Sound No Setting Mode *Operation Forced Time Check Cooling Mode Operation Pit PitPit PitPitPit PitPitPitPit Peet No AC reset code CHECK AC reset code AC reset code AC reset code AC reset code code The default setting is "Cool Only" mode disable.  To enable the "Cool Only" mode, press the AUTO OFF/ON SW for more than 8s and less than 11s, "Pit Pit" sound will be heard, then release the AUTO OFF/ON SW and press remote controller CHECK button. A short "Pit" sound will be heard. "Cool Only" mode is now enable.  To disable the "Cool Only" mode, press the AUTO OFF/ON SW for more than 8s and less than 11s, "Pit Pit" sound will be heard, then release the AUTO OFF/ON SW and press remote controller CHECK button. A long "Pit" sound will be heard. "Cool Only" mode is now disable. 17.2.2 Operation mode during Cooling Only Operation The table below shows the operation mode comparison when cooling only operation mode activated and deactivated. Operation mode AUTO HEAT Cooling Only Operation Mode Activated After 30s sampling, regardless of indoor intake or outdoor intake temperature judgement, the unit will run Cooling or DRY operation. The unit will stop and Power LED blinking. Cooling Only Operation Mode Deactivated After 30s sampling, the unit will judge the operation mode base on remote controller temperature setting and Indoor Intake Sensor (New Auto Mode) or Outdoor Intake Sensor (Old Auto Mode) The unit will run Heating operation. COOL The unit will run Cooling operation. The unit will run Cooling operation. DRY The unit will run DRY operation. The unit will run Dry operation. Force Heating The unit will run Force Cooling operation. AUTO (with Timer) HEAT (with Timer) COOL (with Timer) The unit will turn ON by the timer and run Auto Operation. After 30s sampling, regardless of indoor intake or outdoor intake temperature judgement, the unit will run Cooling or DRY operation. The unit will not turn ON by the Timer. Power LED blinking. The unit will turn ON by the Timer and run Cooling operation. DRY (with Timer) The unit will turn ON by the Timer and run DRY operation. ** Power LED blinking = 2.5s ON, 0.5s OFF The unit will run Force Heating operation. The unit will turn ON by the timer and run Auto Operation. After 30s sampling, the unit will judge the operation mode base on remote controller temperature setting and Indoor Intake Sensor (New Auto Mode) or Outdoor Intake Sensor (Old Auto Mode) The unit will turn ON by the timer and run Heating Operation. The unit will turn ON by the timer and run Cooling Operation. The unit will turn ON by the timer and run Cooling Dry Operation. 71