Panasonic DC-GX9 Basic Operating Manual - Page 21

Charging the battery

Page 21 highlights

Preparations/Basics Charging the battery • The battery that can be used with this unit is DMW-BLG10PP. • We recommend charging in a location where the ambient temperature is between 10 °C and 30 °C (50 °F to 86 °F). Insert the battery into the camera. Make sure that the camera is turned off. Charging lamp (Red) AC adaptor (supplied) To the electrical outlet USB connection cable (supplied) Computer Getting ready: Turn on the computer. To open the socket cover Closing the cover Press lightly Keep pressing and slide Remove your finger • The socket cover will be stored inside the camera. • When the cover is completely closed, it snaps into place. Connect to the [USB/CHARGE] socket [USB/CHARGE] socket • This terminal is located at the bottom when the camera is in an upright position. • Always check the direction of the socket, and hold the plug straight to insert or remove it. (If the cable is inserted in the wrong direction, the socket could become deformed and cause faulty operation.) Also, do not insert into the wrong socket. Doing so may cause damage to this unit. 21 DVQX1379 (ENG)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

21
DVQX1379 (ENG)
Preparations/Basics
Charging the battery
The battery that can be used with this unit is DMW-BLG10PP.
We recommend charging in a location where the ambient temperature is
between 10 °C and 30 °C (50 °F to 86 °F).
Insert the battery into the camera.
Make sure that the camera is turned off.
To open the socket cover
Press lightly
Keep pressing and
slide
Remove your finger
The socket cover will be
stored inside the camera.
Closing the cover
When the cover is
completely closed, it
snaps into place.
Connect to the [USB/CHARGE] socket
[USB/CHARGE] socket
This terminal is located at the bottom when the camera
is in an upright position.
Always check the direction of the socket, and hold the plug straight to insert
or remove it. (If the cable is inserted in the wrong direction, the socket could
become deformed and cause faulty operation.) Also, do not insert into the
wrong socket. Doing so may cause damage to this unit.
Charging lamp (Red)
AC adaptor (supplied)
To the electrical outlet
USB connection cable
(supplied)
Computer
Getting ready:
Turn on the computer.