Panasonic DC-GX9 Basic Operating Manual - Page 71
Start Image App
View all Panasonic DC-GX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Wi-Fi/Bluetooth If you are using an Android device, follow the steps up to here to complete the setup. Proceed to the steps below only if you are using an iOS device. • If [Wi-Fi Password] (→72) is set to [OFF] on the camera, select [Wi-Fi Setup]. (At the time of purchase, [Wi-Fi Password] is set to [OFF]) • If [Wi-Fi Password] is set to [ON] on the camera, you need to install the profile. Install the profile • If the smartphone is locked with a passcode, enter the passcode to unlock the smartphone. Exit the browser 5 Turn on the Wi-Fi function in the setting menu 6 On the Wi-Fi setting screen, select the SSID displayed on the camera (The device name selected in step 4) • If the SSID is not displayed, it may be displayed after the Wi-Fi function is turned off and on. • When you need to change the connected device, follow the on-screen message to change the setting. 7 Start "Image App" • The paired smartphone will be registered as a paired device after connected via Wi-Fi. ●To make a connection with the paired smartphone for the second and subsequent times, enable the Bluetooth function of the camera and set the Bluetooth for "Image App" on your smartphone to ON. Then, select a camera (device name) to be connected from the [Camera registered] list. ●[ ] is displayed on the recording screen when a Bluetooth device is connected. If the Bluetooth function is enabled, but the smartphone is not connected, the displayed [ ] is semi-transparent. ●When it takes time to set up pairing between a smartphone and a camera, delete the pairing information of both devices and register them again. This may enable the devices to be recognized properly. 71 DVQX1379 (ENG)