Panasonic DMC FS20P Digital Still Camera - Page 99
The recorded picture is blurred. The optical image stabilizer is not effective.
UPC - 037988987191
View all Panasonic DMC FS20P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Others The recorded picture is too bright or dark. > Check that the exposure is correctly compensated. (P45) 2 or 3 pictures are taken at one time. > Set auto bracket (P46), [HI-SPEED BURST] (P52) in scene mode or [BURST] (P64) of the [REC] mode menu to [OFF]. The subject is not focused properly. • The focus range varies depending on the recording mode. > Set to the proper mode for the distance to the subject. • The subject is beyond the focus range of the camera. (P30) • There is camera shake (jitter) or the subject is moving slightly. (P31) The recorded picture is blurred. The optical image stabilizer is not effective. > The shutter speed becomes slower when pictures are taken in dark places so hold the camera firmly with both hands to take the pictures. (P27) > When taking pictures at a slow shutter speed, use the self-timer. (P44) Taking pictures using auto bracket is not possible. • Is the number of recordable pictures 2 or less? The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P61) > Set [COLOR MODE] to [NATURAL]. (P65) > Take pictures in bright places. • Has [HIGH SENS.] or [HI-SPEED BURST] in the scene mode been set? If so, the resolution of the recorded picture decreases slightly because of high sensitivity processing, but this is not a malfunction. The brightness or the hue of the recorded picture is different from the actual scene. • If recording under fluorescent light, the brightness or the hue may change slightly when the shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction. A reddish vertical line (smear) appears on the LCD monitor during picture-taking. • This is a characteristic of CCDs, and it appears when the subject has a bright part. Some unevenness may occur in the surrounding areas, but this is not a malfunction. It is recorded in motion pictures but is not recorded on still pictures. • It is recommended that you take pictures while taking care not to expose the screen to sunlight or any other source of strong light. Motion picture recording stops in the middle. • Are you using a MultiMediaCard? This unit does not support MultiMediaCards. > When you set the picture quality to [÷] or [û], we recommend using a high-speed card with "10MB/s" or greater displayed on the package. • Depending on the type of the card, recording may stop in the middle. VQT1M59 99