Panasonic DMC FS42 Digital Still Camera - Page 13
Setting Date/Time (Clock Set), Turn the camera on., Press [MENU/SET]., Press, to select the items year - how to use
View all Panasonic DMC FS42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setting Date/Time (Clock Set) • The clock is not set when the camera is shipped. 1 Turn the camera on. • When you turn the camera on, [PLEASE SET THE CLOCK] message appears. (It does not appear in Playback Mode.) A [MENU/SET] button B Cursor buttons OFF ON A 2 Press [MENU/SET]. B 3 Press w/q to select the items (year, month, day, hour, minute, display sequence or time display format), and press e/r to set. C Time at the home area D Time at the travel destination 4: Cancel without setting the clock. • Select either [24HRS] or [AM/PM] for the time display format. • AM/PM is displayed when [AM/PM] is selected. Cq Dw 4 Press [MENU/SET]. • After completing the clock settings, turn the camera off. Then turn the camera back on, switch to Recording Mode, and check that the display reflects the settings that were performed. • When [MENU/SET] has been pressed to complete the settings without the clock having been set, set the clock correctly by following the "Changing the clock setting" procedure. Changing the clock setting 1 Press [MENU/SET] in Normal Picture Mode. 2 Press e/r to select [CLOCK SET]. 3 Press q and perform steps 3 and 4 for setting. 4 Press [MENU/SET] to close the menu. • You can also set the clock in the [SETUP] menu. • The clock setting is maintained for 3 months using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.) 13 (ENG) VQT2B45