Panasonic DMC FX150K Digital Still Camera - Page 113
The optical image stabilizer is not effective., The recorded picture is blurred.
UPC - 037988988167
View all Panasonic DMC FX150K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Others The recorded picture is too bright or dark. > Check that the exposure is correctly compensated. (P43) • Setting the [MIN. SHTR SPEED] to faster speed might make the picture darker. > Set the [MIN. SHTR SPEED] to slower speed. 2 or 3 pictures are taken at one time. > Set auto bracket (P44)/color bracket (P45), [HI-SPEED BURST] (P52), [FLASH BURST] (P53) in scene mode or [BURST] (P69) of the [REC] mode menu to [OFF]. The subject is not focused properly. • The focus range varies depending on the recording mode. > Set to the proper mode for the distance to the subject. • The subject is beyond the focus range of the camera. (P29) • There is camera shake (jitter) or the subject is moving slightly. (P30) The recorded picture is blurred. The optical image stabilizer is not effective. > The shutter speed becomes slower when pictures are taken in dark places so hold the camera firmly with both hands to take the pictures. (P26) > When taking pictures at a slow shutter speed, use the self-timer. (P42) Taking pictures using auto bracket/color bracket is not possible. • Is the number of recordable pictures 2 or less? The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P63) > Increase the setting for [NOISE REDUCTION] in [PICT.ADJ.] or lower the setting for each of the items other than [NOISE REDUCTION]. (P72) > Take pictures in bright places. • Has [HIGH SENS.] or [HI-SPEED BURST] in the scene mode been set? If so, the resolution of the recorded picture decreases slightly because of high sensitivity processing, but this is not a malfunction. The brightness or the hue of the recorded picture is different from the actual scene. • If recording under fluorescent light, the brightness or the hue may change slightly when the shutter speed becomes fast. This occurs due to the characteristics of fluorescent light. It is not a malfunction. VQT1S88 113