Panasonic DMC FX150K Digital Still Camera - Page 40
Adjust the flash output, Press, several times to display [FLASH], and then
UPC - 037988988167
View all Panasonic DMC FX150K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Advanced (Recording pictures) • In [HIGH SENS.] (P52) in scene mode, the ISO sensitivity automatically switches to between [ISO1600] and [ISO6400] and the available flash range also differs. Wide: Approx. 1.15 m (3.77 feet) to approx. 15.1 m (49.5 feet) Tele: Approx. 90 cm (2.95 feet) to approx. 7.5 m (24.6 feet) • In [FLASH BURST] (P53) in scene mode, the ISO sensitivity automatically switches to between [ISO100] and [ISO3200] and the available flash range also differs. Wide: Approx. 60 cm (1.97 feet) to approx. 4.0 m (13.1 feet) Tele: Approx. 30 cm (0.99 feet) to approx. 2.0 m (6.57 feet) ¢ When the [ISO LIMIT SET] is set to [AUTO]. Adjust the flash output Adjust the flash output when the subject is small, or the reflectivity is very high or low. 1 Press 3 [È] several times to display [FLASH], and then press 2/1 to set the flash output. • You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV]. • Select [0 EV] to return to the original flash output. 2 Press [MENU/SET] to close the menu. • You can also close the menu by pressing the shutter button halfway. Note • When the flash output is adjusted, the flash output value appears on the upper left of the screen. • The flash output setting is memorized even if the camera is turned off. • The flash output adjustment cannot be used while in [FLASH BURST] in scene mode. ∫ Shutter speed for each flash setting Flash setting Shutter speed (Sec.) Flash setting Shutter speed (Sec.) ‡ 1/30¢1 to 1/2000th ‰ 1¢1 to 1/2000th 1 or 1/4th to 1/2000th¢2 Œ 1¢1 to 1/2000th 1 or 1/4th to 1/2000th¢2, 3 ¢1 It may vary depending on the [MIN. SHTR SPEED] setting (P73). ¢2 When Intelligent ISO is set (P63) ¢3 [SPORTS], [BABY1]/[BABY2] and [PET] in scene mode (P47) • ¢2, 3: The shutter speed becomes a maximum of 1 second in the following cases. - When the optical image stabilizer is set to [OFF]. - When the camera has determined that there is little jitter when the optical image stabilizer is set to [MODE1], [MODE2] or [AUTO]. • In Intelligent auto mode, shutter speed changes depending on the identified scene. • There will be differences in the above shutter speeds in the scene modes. - [NIGHT PORTRAIT]/[NIGHT SCENERY]: 8 or 1/8th of a second to 1/2000th of a second¢4 - [CANDLE LIGHT]: 1 or 1/8th of a second to 1/2000th of a second¢4 - [FLASH BURST]: 1/30th of a second to 1/2000th of a second - [STARRY SKY]: 15 seconds, 30 seconds, 60 seconds - [FIREWORKS]: 1/4th of a second, 2 seconds¢4 - All other scene modes: 1/8th of a second to 1/2000th of a second ¢4 The maximum shutter speed is selected when the amount of jitter is minimal while [STABILIZER] is set or when [STABILIZER] is set to [OFF]. 40 VQT1S88