Panasonic DMC-ZS7K User Manual - Page 5

■■About the battery charger CAUTION! DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILTIN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS. Battery charger This battery charger operates on AC between 110 V and 240 V. But ••In the U.S.A. and Canada, the battery charger must be connected to a 120 V AC power supply only. ••When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the AC outlet configuration. ■■Cautions for Use •• Do not use any other AV cables except the supplied one. •• Do not use any other USB connection cables except the supplied one. •• Do not use any other cables except a genuine Panasonic HDMI mini cable (RP- CDHM15/RP-CDHM30; optional). Keep the camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). •• If you use the camera on top of or near a TV, the pictures and sound on the camera may be disrupted by electromagnetic wave radiation. •• Do not use the camera near cell phones because doing so may result in noise adversely affecting the pictures and sound. •• Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors. •• Electromagnetic wave radiation generated by microprocessors may adversely affect the camera, disturbing the pictures and sound. •• If the camera is adversely affected by electromagnetic equipment and stops functioning properly, turn the camera off and remove the battery or disconnect AC adaptor (DMW-AC5PP; optional). Then reinsert the battery or reconnect AC adaptor and turn the camera on. Do not use the camera near radio transmitters or high-voltage lines. •• If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may be adversely affected. 5 (ENG) VQT2L60