Panasonic DMP BD30 Blu-ray Disc Player - English/spanish - Page 22

Settings 11 Changing the unit's settings "TV/Device Connection" tab (continued) HDMI Connection ≥Press [OK] to show the following settings. HDMI Video Mode ≥On: Images are output from the HDMI terminal in the resolution set in "HDMI Select "On" when video is output from HDMI AV OUT terminal. Resolution". Video from COMPONENT VIDEO OUT terminal is output as "480i". ≥Off Images are output in the resolution set in "Component Video Resolution". HDMI Resolution ≥Auto: Automatically selects the output resolution best suited to the The items supported by the connected devices are indicated on the screen as "¢". When any item without "¢" is selected, the images may be distorted. connected television (1080p, 1080i, 720p or 480p). ≥480p ≥720p ≥1080i ≥1080p When the unit is connected to an amplifier/receiver that does not support the resolution set on the unit, the video cannot be output properly. In this case, use the HDMI cable to connect the unit to the TV and then connect the unit to the amplifier/ receiver using a cable other than HDMI. BD-Video 24p Output When playing BD-Video recorded in 24 frames, this unit displays each frame at 1/24 second intervalssthe same interval originally shot with the film movie. ≥This item can be set only when the unit is connected to a TV with an HDMI terminal that supports 1080/24p input. ≥On: ≥Off Images in 24p are output in 24p as they are. (This is effective only when "HDMI Resolution" is set to "Auto" or "1080p" and "TV Aspect" is set to "16:9" or "16:9 Full".) However, - when video is being output at 24 frames, images from any other terminal than the HDMI terminal may not be output properly. - when images other than 24p are played, images are output at 60p. HDMI RGB Output Range ≥Standard: Effective when connected to a device that only supports RGB output. ≥Enhanced: When the black and white images are not distinct. HDMI Audio Output ≥On: This setting selects whether or not to output audio from ≥Off: When the TV is connected to this unit using an HDMI cable, and this unit is HDMI. also connected to other devices, such as an amplifier/receiver using an optical digital audio cable or a coaxial cable. EZ Sync ≥On Set to use "HDAVI Control" function when connected with ≥Off: Select when you do not want to use "HDAVI Control". an HDMI cable to a device that supports "HDAVI Control". Component Video Resolution ≥480i ≥480p ≥720p ≥1080i This sets the video output resolution when using the Even if you select "720p" or "1080i", images are output in 480p when you play component video terminal. DVD-Video. Speaker You can set the unit to output the best possible sound for your speakers. ≥Multi Channel: When using 3 or more speakers. (> below) ≥2 Channel: When using two speakers. 2ch down-mix audio are output from Front L and Front R. Changing the speaker setting to suit your speakers RQT9037 (ENG) 22 When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on the amplifier/receiver. The settings are not effective when outputting bitstream signals. Front (L) Complete Test Center L ms 0.0 C dB 0.0 R dB dB 0.0 0.0 Complete Test dB 0.0 SW dB ms dB LS 0.0 0.0 0.0 RS Front (R) Subwoofer ms LB 0.0 RB (LS) Surround (RS) (LB) Surround back (RB)§ 5.1ch speaker 7.1ch speaker connection connection Approximate room dimensions C C : Actual L C R L C R speaker position DE DE SW : Ideal SW LS LS F RS RS speaker position F F LS RS DEF LB RB : Primary LS RS LB RB listening Circle of constant primary listening distance distance D Center speaker Difference F Surround/Surround back Setting speakers Approx. 34 cm (1 ft. 1 in.) 1.0 ms Difference Setting § Surround back channel is enabled only when the unit is connected to an amplifier/receiver supporting HDMI 7.1 channel audio. Speaker presence and size (A) 1 Press [3, 4, 2, 1] to select the speaker icon (A) and press [OK]. 2 Press [3, 4] to select the setting and press [OK]. Icon examples: Surround speaker (LS) ≥Large: Select when the LS LS speaker supports low-frequency (under Large Small No 100 Hz) reproduction. ≥Small: Select when the speaker does not support low-frequency reproduction. In order to make an ideal listening environment, settings of speaker sizes may be automatically adjusted. For example, if the subwoofer is set to "No", the front speakers will automatically be set to "Large". (In this case, we recommend connecting a speaker that can reproduce bass below 100 Hz.) Delay time (B) For optimum listening with 7.1/5.1-channel sound, all the speakers, except for the subwoofer, should be the same distance from the seating position. If you have to place the center, surround and surround back speakers closer to the seating position, adjust the delay time to make up for the difference. If either distance D or F is less than E, find the difference in the relevant table and change to the recommended setting. 1 Press [3, 4, 2, 1] to select the delay time box (B) and press [OK]. 2 Press [3, 4] to select the setting and press [OK]. Approx. 68 cm (2 ft. 2 in.) 2.0 ms Approx. 102 cm (3 ft. 4 in.) 3.0 ms Approx. 136 cm (4 ft. 5 in.) 4.0 ms Approx. 170 cm (5 ft. 6 in.) 5.0 ms Approx. 170 cm (5 ft. 6 in.) 5.0 ms Approx. 340 cm (11 ft. 1 in.) 10.0 ms Approx. 510 cm (16 ft. 8 in.) 15.0 ms Channel balance (C) This does not work when connected with the HDMI terminal and "HDMI Audio Output" (D above) is set to "On". 1 Select "Test" and press [OK]. A test signal is output. Front (L)_-)Center_-)Front (R)_-)Surround (RS) : ; Surround (LS)(- Surround Back (LB)§ (- Surround Back (RB)§ §Test signal is output only when the unit is connected using HDMI AV OUT terminal. 2 While listening to the test signal, press [3, 4] to adjust the volume of each speaker Front speakers: 0.0 to s6.0 dB Center and surround speakers: 0.0 to s12.0 dB You cannot adjust the volume of surround back speakers. 3 Press [OK]. The test signal stops. ≥No signal is output for the subwoofer. To adjust its volume, play something, then return to this screen to adjust to suit your taste. 4 Press [3, 4, 2, 1] to select "Complete" and press [OK].