Panasonic DMP BD30 Blu-ray Disc Player - English/spanish - Page 26

Reference 11 Troubleshooting guide HDMI connections (continued) No sound. Low volume. Distorted sound. Cannot hear the desired audio type. ≥Audio may not be heard when more than 4 devices are connected with HDMI cables. Reduce the number of connected devices. ≥The sound effects will not work when the bitstream signal is output from the HDMI AV OUT terminal or the DIGITAL AUDIO OUT terminal. ≥To output audio from a device connected with an HDMI cable, set "HDMI Audio Output" to "On" in the Setup menu. ≥If the sound is distorted when the unit is connected to an amplifier/receiver with an HDMI cable, adjust the settings in "Speaker" in the Setup menu to match the connection. ≥Depending on the connected equipment, the sound may be distorted if this unit is connected with an HDMI cable. ≥When "BD-Video Secondary Audio" is set to "On", Dolby Digital Plus, Dolby TrueHD, and DTS-HD are converted to 48 kHz Dolby Digital and output. LPCM 7.1 channel audio is converted to 5.1 channel audio. In this case, set the "BD-Video Secondary Audio" to "Off". Card The capacity of the SD card decreased. MPEG-2 motion pictures and music on an SD card cannot be played. The contents of the card cannot be read. ≥When a BD-Video that supports the virtual package is used, and an SD card is in the slot, data may be written to the SD card. Erase the data by using "BD-Video Data Erase", format the card or use a new card. ≥Data that can be played from an SD card are AVCHD and JPEG data. ≥The card is not compatible or the contents on the card may be damaged. ≥Turn off and then turn on the unit again. Other difficulties with playback Audio and video momentarily pause. ≥This occurs between playlist chapters or scenes ([AVCHD]). ≥When playing a title recorded on both layers, the unit automatically switches between layers and plays the title in the same way as a normal program. However, video and audio may momentarily cut out when the unit is switching layers. BD-Video or DVD-Video is not played. ≥Ensure the disc is for the correct BD-Video region code or DVD-Video region number, and is not defective. ≥You have set a ratings level to limit BD-Video or DVD-Video play. Change this setting. ≥Some BD-Video can only be output with HDMI. Picture-in-picture is not played ≥Confirm whether the disc supports picture-in-picture. with BD-Video. The virtual package is not played with BD-Video. ≥Confirm whether the disc supports the virtual package. ≥The inserted SD card does not have sufficient available capacity. ≥The SD card is write-protected. ≥Sub contents copied to an SD card are provided by the disc producer as a part of the BD-Video content. Even if you record images and audio onto an SD card, it cannot be played as a virtual package. Alternative soundtrack and subtitles cannot be selected. ≥The languages are not recorded on the disc. ≥You may not be able to use the on-screen menu to change the soundtrack and subtitles on some discs. Use the disc's menus to make changes. No subtitles. ≥Subtitles are not recorded on the disc. ≥Turn the subtitles on. Set "Subtitle" on the on-screen menu to "On". ≥When progressive output is on, closed captions cannot be displayed. The subtitles overlap closed captions recorded on discs. ≥Turn off the subtitles or turn off the closed caption setting on the TV. Angle cannot be changed. ≥Angles can only be changed during scenes where different angles are recorded. The resume play function does not work. ≥Memorized positions are canceled when - pressing [∫] several times. - opening the disc tray. ≥The resume play function may not work depending on the disc. Page - - 22 22 - 21 13 4 4 - - - Cover 20 - - 13 - 4 13 - 11, 13 - 18 - 18 - - - When other Panasonic products respond to this remote control Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together. 1 Press [SETUP]. 2 Press [3, 4] to select "Setup" and press [OK]. 3 Press [3, 4] to select "Remote Control Code" and press [OK]. 4 Press [3, 4] to select the code (1, 2, or 3) and press [OK]. 5 To change the code on the remote control While pressing [OK], press and hold the Remote Control Code Set Code 1 Set Code 2 Set Code 3 Press [ ] and [OK] together for more than 5 seconds on the remote. NOTE When the following indicator appears on the unit's display and you are unable to operate the unit D R The unit's remote control code Press and hold [OK] and the indicated number button at the same time for more than 5 seconds. numbered button ([1], [2] or [3]) for more than 5 seconds. 6 Press [OK]. RQT9037 (ENG) 26