Panasonic DMP-BDT270 Owners Manual - Page 13

Connections and settings If your wireless router supports WPS (Wi-Fi Protected SetupTM); You can easily set up a connection by pressing the green button on the remote control. If your wireless network is encrypted; Enter your encryption key (password). ≥ You can switch between capital and lower case letters by pressing the "Shift" key. ≥ An USB keyboard can be used, but only for the keys displayed on the screen. Encryption Key (Password) M Shift 123456 78 90 Space / : Symbols . Alphanumeric Other Characters Delete Finish OK RETURN 'PVGT ECUGUGPUKVKXG Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge. This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.* When a new firmware version is available, the following message is displayed. Firmware Update New Version: X.XX Current Version: X.XX Do you want to start firmware update? For the update information, please visit the following website: http://panasonic.jp/support/global/cs/ Yes No OK RETURN ≥ Refer to the owner's manuals of the hub or router. ≥ Do not use this unit to connect to any wireless network for which you do not have usage rights. Using these networks may be regarded as illegal access. ≥ If you have trouble getting online on your PC after performing network settings on this unit, perform the network settings on your PC. ≥ Please be aware that connecting to a network without encryption may result in the leaking of data such as personal or secret information. * SSID: An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices. You can also download the latest firmware from the following website and store it to a USB device to update the firmware. http://panasonic.jp/support/global/cs/ (This site is in English only.) DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place. After the firmware is installed, unit will restart and the following screen will be displayed. e.g., The firmware was updated. Current Version: x.xx RETURN ≥ To show the firmware version on this unit. (> 27, "Firmware Version Information") ≥ Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment. ≥ If you do not want to check for the latest firmware version, set "Automatic Update Check" to "Off". (> 27) * You must agree to the terms of use for the Internet function and the privacy policy. ([BDT270] > 15, "Notice", [BD903/93] > 26, "Notice") - 13 -