Panasonic DMR-E75 Operating Instructions - Page 13

Before Use STEP 2 Plug-in Auto Tuning Í OUTPUT 3, 4, 2, 1 ENTER DVD/VHS POWER TV POWER INPUT SELECT TV/VIDEO CH VOLUME DVD/VHS OUTPUT VHS DVD TRPACLKAINYG/V-LOCK DVD DIRECT NAVIGATOR TOP MENU FUNCTIONS AUDIO VHS MENU FUNCTIONS SUB MENU RETURN PROG/CHECK DISPLAY STATUS TIME SLIP After plugging the unit into your household AC outlet and pressing [Í, DVD/VHS POWER] to turn the unit on for the first time, the unit assists you to set the on-screen language, and automatically tunes in all the channels it can receive and sets the clock. The unit automatically determines the type of transmission (airwaves or cable) and puts them into channels as follows. Band Channel TV Mode (Airwaves) VHF UHF 2-13 14-69 VHF 2-13 CATV LOW BAND 95-99 CATV Mode (Cable) CATV MID/SUPER BAND CATV HYPER BAND 14-36 37-65 ULTRA BAND 66-94 100-125 SPECIAL CATV CHANNEL 1 Preparation ≥Turn on the TV and select the appropriate video input to suit the connections to this unit. ≥If you connect the unit through a cable TV box or satellite receiver (l 11), tune to your local PBS for "Auto Clock Setting" to work. If there is no local PBS, set the clock manually (l 46, "Manual Clock Setting"). ≥Press [DVD]. [1] Press [Í, DVD/VHS POWER]. Select Language Seleccione la Lengua Sélection de Langue English Español Français Press ENTER Pulse ENTER Appuyer sur ENTER [2] Use [3, 4] to select the language and press [ENTER]. [3] Press [ENTER] to start Plug-in Auto Tuning. Auto Channel Setting CH. 1 Auto Channel Setting Proceeding . . . 1 1 1 The unit then proceeds with Auto Clock Setting. The time is displayed when finished. Auto Clock Setting Auto Clock Setting is complete. 4/4/2004 12:15 AM DST ON TIME ZONE.... CST ≥DST, Daylight Saving Time, shows the summertime setting. ≥TIME ZONE shows the time difference from Greenwich mean time (GMT). EST (Eastern Standard Time) l GMT j5 CST (Central Standard Time) l GMT j6 MST (Mountain Standard Time) l GMT j7 PST (Pacific Standard Time) l GMT j8 AST (Alaska Standard Time) l GMT j9 HST (Hawaii Standard Time) l GMT j10 For other areas: xx hr [4] Press [ENTER]. ∫ If the clock is an hour slower or faster than the actual time Select "j1" or "i1" in "Time Zone Adjust" in the SETUP menu (l 46). ∫ If the unit couldn't set the clock automatically Set the time manually (l 46, "Manual Clock Setting"). ∫ To start Plug-in Auto Tuning again (after relocation, for example) Antenna system, channel caption, and guide channel settings for VCR Plusi system all revert to the default values when you perform the procedure below. Timer recording settings are also cleared. When the unit is on and stopped [1] Press and hold [CH, W] and [CH, X] on DVD of the main unit for about 5 seconds. The unit turns off. [2] Press [Í, DVD/VHS POWER] to turn the unit on. 13