Panasonic DMR-E75 Operating Instructions - Page 59
Manual Transfer Dubbing
View all Panasonic DMR-E75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Advanced Operations DVD VHS ∫ Manual Transfer (Dubbing) [RAM] [DVD-R] You can specify the position to start transfer (dubbing) of the program recorded on the tape to the disc. ≥Available discs for transfer (dubbing) from tape are DVD-RAM and non-finalized DVD-R. ≥Copy-guarded video tapes cannot be dubbed. Most video tapes are copy-guarded to prevent illegal reproduction and they cannot be recorded with the following procedure. Preparation ≥Select the unit viewing channel (or the AV input) on the TV. DVD ≥Release protection (disc l 30, cartridge l 18). [RAM] ≥Insert a disc and confirm there is sufficient empty space for recording on it. (l 20, 47) VHS ≥Insert the video cassette containing the program to be copied (l 48). ≥Check the channel. If "DC" channel is selected, transfer (dubbing) does not work properly. - When the "DC" channel is selected on VHS, you cannot select the "TP" channel. [1] Press [VHS] and press [1, PLAY]. Start playing the video cassette and find the recording start point. ≥Select the audio to be played (the audio to be recorded) beforehand. [2] Press [;, PAUSE] at the start point of the recording. [3] Press [DVD]. [4] Select "TP" channel with [CH, W, X]. ≥The VHS picture is displayed on the TV. [5] Press [REC MODE] to select the recording mode. [6] Press [¥, DVD REC]. ≥Disc recording and VHS play start at the same time. To pause or stop Manual Transfer (Dubbing) You cannot stop or pause on DVD and VHS at the same time ∫ To pause or stop recording Press [DVD] and press [;, PAUSE] or [∫, STOP]. ∫ To pause or stop play Press [VHS] and press [;, PAUSE] or [∫, STOP]. ∫ When transfer (dubbing) is started, the following operations also start automatically ≥"OSD" on VHS MENU ) "OFF" (l 56) ∫ Only the following operations are allowed while transferring (dubbing) ≥Turning the unit off/on ≥Stopping transfer (dubbing) by pressing [STOP] Note: ≥When the transfer (dubbing) is already started, you can switch the output manually. ≥When a Copy-guarded tape is inserted, the message appears on the display and the recording stops on the spot. ≥If a part of the tape recorded in VP mode is dubbed to disc, noises may appear on the beginning of the dubbed part. ∫ About TP channel (TP: Dubbing input channel) ≥TP channel can be recorded only when the DVD input channel is set to "TP". ≥When you play back a tape turning the channel to "TP", the picture on VHS is displayed on the TV screen. 59