Panasonic DMRE75VP DMRE75VP User Guide - Page 62

Advanced Operations DVD VHS Recording from an external device When connecting to the L2 input terminals on the front of the unit ≥You can also connect to the L1 input terminals on the rear of the unit. Before connecting any cables, first make sure that the power for both units is off. Then, after connecting cables, turn on both units. Note ≥When recording using this unit's input terminals, only the sound received at the time of recording will be recorded. As long as secondary audio that is recorded on the media in the external device is not output to the unit in play, it is not recorded. ≥If the audio output of the other equipment is monaural, connect to L/ MONO. (Both left and right channels are recorded when connected through L/MONO.) ≥The S-VIDEO terminal achieves a more vivid picture than the VIDEO terminal. POWER Í/I EJECT PULL OPEN VHS DVD VIDEO IN L/MONO - AUDIO IN - R CH S-VIDEO IN L2 (1) (3) (1) Audio/Video cable (not supplied) A Yellow (VIDEO) (2) B White (L) C Red (R) (2) S video cable (not supplied) (3) Other playback equipment Preparation DVD [RAM] [DVD-R] ≥Release protection (disc l 30, cartridge l 18). [RAM] ≥Press [DVD]. VHS ≥Insert a video cassette with an intact erasure prevention tab. (l 48) ≥Press [VHS]. [1] Press [REC MODE] to select the recording mode. (DVDl 27, VHSl 51) ≥DVD [RAM] [DVD-R] - It is also possible to perform Flexible Recording (FR). (l 27) [2] While stopped Press [CH, W, X] or [INPUT SELECT] to select the input channel. ≥Select L1 or L2. INPUT SELECT ∫ µ, VHS REC REC MODE DVD/VHS POWER TV POWER INPUT SELECT TV/VIDEO CH VOLUME DVD/VHS OUTPUT VHS DVD TRACKING/V-LOCK SKIP/INDEX SLOW/ REW SEARCH FF AUDIO PLAY CANCEL/RESET VCR Pl PROG/CHECK DISPLAY STATUS TIME SLIP DIRECT NAVIGATOR FUNCTIONS VHS REC REC MODE DVD REC ADD/DLT TOP MENU VHS MENU CHAPTER DVD ERASE DUBBING VHS DVD JET REW VHS DVD CH, W, X 1 ; µ, DVD REC 1 DVD [3] Start play on the other equipment. [4] Press [¥, DVD REC] at the point where you want to start recording. 1 VHS [3] Press [1, PLAY]. Start playing the video cassette and find the recording start point. [4] Press [;, PAUSE], then press [¥, VHS REC]. Put the unit in recording standby mode. [5] Start play on the other equipment. [6] Press [;, PAUSE] at the point where you want to start recording. ∫ To skip unwanted parts Press [;, PAUSE] to pause recording. (Press again to restart recording.) ∫ To stop recording Press [∫, STOP]. For your reference ≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded. 62