Panasonic DMWFL360L DMWFL360L User Guide - Page 9

Press the [ON/OFF] button. ≥ The control panel display will turn on. ≥ To turn the flash off, press the [ON/OFF] button again. ≥ Replace the batteries if the [TEST/CHARGE] lamp does not light after: 30 seconds (Alkaline dry batteries) 10 seconds (Rechargeable nickel metal hydride batteries) ≥ If the [TEST/CHARGE] lamp and [AUTO CHECK] lamp blink simultaneously, batteries are running low. Replace the batteries. Using a considerably exhausted battery may result in malfunction. ≥ The flash will enter sleep mode whenever the camera enters sleep mode. ≥ If no operations are performed for approximately 60 minutes, the flash will turn off automatically. Press the [ON/OFF] button to turn it on. ≥ Oscillating sound may be output while charging the flash, but this is not malfunction. Shooting   1 Flash mode  2 Lighting angle Displayed according to the focal length of the  lens. 3 [AUTO CHECK] lamp 4 Light working range 1 Use camera controls to choose the flash mode. See the camera operating instructions for details. 2 Choose a flash mode. "Flash Mode" (P10) • The camera and flash will exchange shooting information and the flash working range will be displayed in the control panel. 3 Press the shutter button halfway. • Flash range varies with camera settings (ISO sensitivity, aperture, and lens focal length). 4 Press the shutter button the rest of the way down to take the picture. The unit emits light in proper exposure if [AUTO CHECK] lamp flashes for approximately 5 seconds. ≥ When using a flash, flash light may be blocked by the lens body, lens hood, etc. ≥ Use the wide panel to prevent overexposure at ranges of less than 1 m (3.3 feet) (P13). 9 (ENG) VQT4Q07