Panasonic DVDLV65 DVDLV65 User Guide - Page 20

Troubleshooting Guide Problem Solution The LCD is dark. Adjust the brightness. I The picture is disrupted during fast forward and rewind. Some disruption is normal. SD moving picture quality is poor (jittering or blocky). No picture on the LCD Select a picture mode other than "OFF" (no picture). I Picture from another unit not shown on the LCD. Check connections. Q Ensure the input setting is correct. Q Ensure the power of the connected equipment is on. Picture doesn't appear on the television (or the size of the picture seems wrong). Check connections. P Check that the television is on. Check that the input mode on the television is correct. Check the settings in "Video-TV Aspect". Q LCD pixels turn black or radiate different colors. The LCD is constructed with precision technology so 99.99 % of the pixels are active, but of the remaining of 0.01 %, there are pixels that may be black or emit light constantly. This phenomenon is not a malfunction. Reference [Í] and [CHG] indicators RQT6536 The [Í] indicator flashes rapidly. The [Í] indicator flashes slowly. The [CHG] indicator flashes rapidly. The [CHG] indicator flashes slowly. 38 The unit has malfunctioned. Consult your dealer. The unit is on and the LCD is closed or the display mode is set to "OFF" (no picture). Turn the unit off when you have finished. There is a problem with the battery pack. Turn the unit on and check the message on the LCD. W Battery pack charge is low. The unit will turn off automatically after a few minutes. ; Displays On-Screen Menu Icons are cut off or are not displayed at all. No On-Screen display. "Check the disc." "X" "UNPLAYABLE CARD" "CHECK CARD" "NO FILE" " ERROR 01" " ERROR 02" " ERROR 03" "H stands for a number. "U11" Use [3, 4] while the rightmost icon is highlighted to move them down. J Go to the Display menu in the SETUP screen, and select "On" for "On-Screen Messages". O Clean the disc. 9 You are trying to play incompatible or corrupted data. This data cannot be played. The data cannot be played. The card cannot be played or the unit failed to read the card. Try reinserting it. > Data the unit can play is not recorded on the card or you haven't inserted a card. A problem has occurred with the battery pack. Consult your dealer. The battery pack has been recharging for 12 hours but has failed to recharge for some reason. Recharge again. You are recharging in a location that is too hot or too cold. Recharge at normal temperature. Trouble has occurred. The number appearing after H depends on the problem. Turn the unit off and on again. Alternatively, turn the unit off, disconnect the power source (AC or battery pack) reconnect the power and turn the unit on again. If the service numbers fail to clear, note the service number and contact a qualified service person. Reference Note The following do not indicate malfunction. ≥Sound from the AC adaptor during recharging. ≥The battery pack warms up after recharging or during use. Maintenance ∫ To clean this unit, wipe with a soft, dry cloth. ≥Use eyeglass cleaner to remove stubborn dirt from the LCD. ≥Never use alcohol, paint thinner or benzine to clean this unit. ≥Before using chemically treated cloth, read the instructions that came with the cloth carefully. ∫ Maintenance of the lens ≥Remove dust carefully with an air blower for camera lenses (optional). ≥Recommended product: ≥≥Lens cleaner kit (SZZP1038C) ≥≥(Available from Panasonic dealers.) ≥Be careful not to touch the lens with your fingers. RQT6536 39