Panasonic DVDLX110 DVDLX110 User Guide - Page 38

Troubleshooting guide Troubleshooting guide Sound incorrect Piercing noise comes from the speakers. p If you have connected a digital amplifier which does not include decoder, be sure to select "PCM" in "Dolby Digital" or "DTS Digital Surround" in "Audio" tab. (29) Effects do not work. p None of the audio effects work when the unit is connected through the digital optical cable and is outputting bitstream signals. (33) p Some audio effects do not work or have less effect with some discs. p H.Bass, Advanced Surround, Multi Re-master and Sound Enhancement do not work if you have changed the play speed. No sound from center speaker. p Press [CENTER SPEAKER]. (18) No sound from other speakers. p Check all connections and settings. (33) No sound when you p There may be a pause in sound. This is not a malfunction. change the play speed. 5.1 ch audio does not work. p Output is 2 channels if you have changed the play speed. p This unit plays DVD-Audio in 2 channels. Recording Cannot record to digital recording equipment. (Incorrect sound recorded.) p You cannot record WMA/MP3. p You cannot record DVDs that have protection preventing digital recording. p You cannot record DVDs if the recording equipment cannot handle signals with a sampling frequency of 48 kHz. p Make the following settings: - Advanced Surround: Off (18) - PCM Digital Output: Up to 48 kHz (29) - Dolby Digital/DTS Digital Surround: PCM (29) Displays "" p The operation is prohibited by the unit, disc or card. No On-Screen display. p Select "On" for "On-Screen Messages" in "Display" tab. (29) "Check the disc." "U11" p Clean the disc. (6) p You inserted a disc that has not been finalized. (10) " ERROR 01" p A problem has occurred with the battery pack. Consult your dealer. " ERROR 02" p The battery pack has been recharging for 20 hours but has failed to recharge for some reason. Recharge again. " ERROR 03" p You are recharging in a location that is too hot or too cold. Recharge at normal temperature [K5 to K35 QC (K41 to K95 QF)]. "H tt" tt stands for a number. p Trouble has occurred. The number appearing after "H" depends on the problem. Turn the unit off and on again. Alternatively, turn the unit off, disconnect the power source (AC or battery pack), reconnect the power and turn the unit on again. If the service numbers fail to clear, note the service numbers and consult your dealer. "Cannot display group xx, p You are trying to play incompatible groups or content. (25) content xx" [¦] and [CHG] indicators The [¦] indicator flashes p The unit has malfunctioned. Consult your dealer. rapidly. The [¦] indicator flashes p The unit is on and the LCD is closed or the monitor mode is set to slowly. "OFF" (No picture). Turn the unit off when you have finished. RQT8231 The [CHG] indicator flashes rapidly. p There is a problem with the battery pack. Turn the unit on and check the message on the LCD. (above) The [CHG] indicator flashes slowly. 38 p Battery pack charge is low. The unit will turn off automatically after a few minutes. 38