Panasonic EH-HS99 Operating Instructions - Page 13

Before use Heating the iron plate 1 Release the Open/Close Lock. Release 2 Insert the plug into the household outlet. 3 Press the Power Switch to turn on the straightener. ••The nanoe™ Lamp glows. •• Confirm that the Temperature Setting Lamp for 150 is blinking. ►Note ••Do not use the straightener if all the Temperature Setting Lamps are blinking. 4 Set a temperature by using the Temperature Setting Switches according to the characteristics and condition of your hair. ••When you use the straightener for the first time, be sure to set the temperature to 150 °C. ••The temperature is raised using [+] and lowered using [-] of the Temperature Setting Switches. Indicator Temperature Approx. 230 °C Hair type Wavy Hair condition Less damaged Approx. 200 °C Approx. 180 °C Approx. 170 °C Approx. 150 °C Straight Damaged ••Confirm that the Temperature Setting Lamp has changed. ••When the selected Temperature Setting Lamp stops blinking (and glows), the straightener has reached the selected temperature. (Note that the time taken to reach operating temperature may vary depending on the operating environment.) ►Notes ••A temperature level of more than 200 is high and may damage your hair. We recommend that you avoid continuous lengthy use of this level, and only use it if your hair is in a suitable condition. ••After switching on, the straightener reaches operating temperature (approximately 100 °C) after about 30 seconds. 13 English