Panasonic EH-HS99 Operating Instructions - Page 16
Troubleshooting, Specifications, Problem, Possible cause, Action
View all Panasonic EH-HS99 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English Troubleshooting Problem ••Sparks are generated inside the nanoe™ Outlet. ••The nanoe™ Outlet emits a noise (crackling noise). When the temperature is set to [230], [200], or [180] it blinks alternately between 230 °C, 200 °C, or 180 °C and 170 °C. All temperature setting lamps keep blinking. It takes time to reach operating temperature. Possible cause Dust, styling products, etc. are adhered to the pin-shaped portion where nanoe™ is generated. It is on standby mode. The time to reach operating temperature (approximately 100 °C) differs depending on the area. 100 - 120 V: about 30 seconds 220 - 240 V: about 30 seconds Action Clean the nanoe™ Outlet to remove any adherents. When resuming use, press the [+] or [-] temperature setting switches and return the temperature setting to 230 °C, 200 °C, or 180 °C. Please request an inspection or repair from place of purchase. If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair. Specifications Power source 100 - 120 V 50 - 60 Hz 220 - 240 V 50 - 60 Hz Power consumption 38 W The amount of power consumption is determined as the arithmetic mean value of the power input occurring during a representative period. This product is intended for household use only. 16